Electronics Forum | Tue Oct 30 08:48:01 EST 2001 | dougie
Hi, Our PCB designers are beginning to send up designs to manufacturing that have increasingly difficult footprints to work with. The footprints have been generated by the IPC-SM-782 calculator but just look wrong to me. The pitch of the devices in
Electronics Forum | Wed Nov 07 17:11:14 EST 2001 | davef
1 CAN WAVE SOLDER AFFECT OR DAMAGE BGA? Sure. Since you are vague, assuming: * Partially assembled board was not stored to prevent moisture absorption. * BGA is in a plastic package. * Partially assembled board was stored long enough to exceed th
Electronics Forum | Thu Apr 18 14:22:39 EDT 2002 | eedllc
I agree with Steve Huey, as a former Field Engineer and Asian Customer service manager living in Hong Kong for almost 10 years with little blue, there has been an incremental hit on all of the OEM's combined profits.They needed a strategy and some sc
Electronics Forum | Wed Apr 17 12:01:32 EDT 2002 | cyber_wolf
I am Sr. process technician that has been working in the SMT industry for over ten years. I recently had a phone conversation with a major equipment manufacture's service department. The person that I got on the phone in the service department was ve
Electronics Forum | Fri May 24 11:49:55 EDT 2002 | stefwitt
Again, I would like to refer to the tape dimensions and their deviations. In an 8 mm tape the distance from the sprocket holes to the tape pocket is 3.5 mm +/- 0.05 mm. This tolerance is easy to achieve, because in the manufacturing process of the ta
Electronics Forum | Tue May 07 15:24:13 EDT 2002 | gregp
I believe Mitutoyo makes a CMM for that application. They were soliciting the idea at APEX show a couple of years ago. I believe they were going to develop some software to do just what you are asking for (following the IPC-9850 format). A CMM, ho
Electronics Forum | Tue May 28 08:55:25 EDT 2002 | pjc
Rick, Here is a piece written in, I belivee the April issue SMT Magazine: Binghamton, N.Y. Sanyo High Technology and Universal Instruments Corp. have renewed an agreement whereby Sanyo will continue to provide the HSP line of chipshooters sold und
Electronics Forum | Mon Jul 15 15:06:35 EDT 2002 | tmv
The focus of this discussion thread seems to have shifted. To bring it back around I offer the following.... It will absolutely be a far different landscape within a year. Those who survive might not be the biggest or the best....but the smartest. T
Electronics Forum | Sun Jul 14 00:54:49 EDT 2002 | caldon
There are jobs out there....you just need to know where and what. If you are looking at Original Equipment manufacturers (Fuji,Siemens,exc.....) or CM's good luck! 1) you must be able to travel a fair amount 2)you may need to relocate. With that sa
Electronics Forum | Wed Aug 07 11:55:31 EDT 2002 | slthomas
Ron, have a look at http://www.fda.gov/cdrh/dsma/cgmphome.html It would be a nightmare, if your plant is not structured to support it. It's a huge pain in the fanny even when you (alledgedly) are. I'm not sure what you're pursuing, but if you're c
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
