Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Mon Jul 26 10:44:08 EDT 1999 | Boca
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Tue Jan 17 10:59:43 EST 2006 | Rob
Hi Pete, Thanks for taking the time to respond. My experiences with Mydata would differ from yours, but as in life, different machines are for different circumstances. We have many low volume customers that love them - they are easy to use, upgr
Electronics Forum | Thu Sep 22 13:09:16 EDT 2005 | gregp
Thanks for the reply Rob, This we already do. The machine will pick from the most efficient available feeder (assuming multiples of the same part number)...so when you remove the primary it will seemlessly move to the next available. When you re-in
Electronics Forum | Fri Jan 16 16:34:01 EST 2015 | rgduval
It's a four-spindle head. I've already learned the joys of the size of the nozzles...on a job that had an 0603 cap a bit too close to an SOIC. The first panel ran, and the cap placed after the IC...and I had parts everywhere. Got it figured out an
Electronics Forum | Fri Jan 16 16:35:49 EST 2015 | rgduval
Evtimov, I would love to look at a more contemporary machine! Or, jobs that fit better on the machine that we have. However; a. we're a start up, and the GSM was here before I was; and b. we're a start up, in the EMS world, and sometimes, don't get
Electronics Forum | Wed Jul 17 18:00:37 EDT 2019 | rgduval
Generally, the machines can place the same types/sizes of components. The advantage with the 11 is that you can have more magazines loaded with more components, and build larger assemblies more efficiently. The -9, though, will get you through near
Electronics Forum | Wed Jul 07 13:56:57 EDT 2004 | Pierre RICHARD
As converting our boards to lead-free finish (Immersion White Tin) we decided to change de mask color from green to blue. We thought this would be a good idea to spread the idea so we could easily recognize the type of solder application related to t
Electronics Forum | Fri Aug 22 15:27:13 EDT 2008 | wayne123
this is the order that I use. 1. Teach pcb origin 2. Teach fiducial location 3. dial in vision on fid in mark info. 4. go into mount and verify that the primary image is on in x/y (after perfoming a teach trace condition) and then do any offsetts if
Electronics Forum | Fri Jul 23 13:09:48 EDT 1999 | Steve
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
