Electronics Forum | Mon Dec 17 12:06:58 EST 2007 | pjc
5 Steps to Eliminate Bridges: 1. Establish (wave) Parallelism First and foremost, you must establish board-to-wave parallelism. This is the prerequisite to any wave solder process control. For an understanding of the power of this approach go to ht
Electronics Forum | Tue Mar 28 07:28:25 EST 2006 | Rob C
I would have to disagree on this. My experience is that you should never justify capital expediture based on just the obvious up front costs alone. There is no mention of risk of recall, warranty costs, scrap costs,and so on. Which you may get from a
Electronics Forum | Tue Jan 20 09:41:25 EST 2015 | rgduval
Well put, Evtimov! :) I've made my argument against it. I'm not comfortable taking a job placing parts outside the capabilities of the machine in general, much less parts that I can't actually see! The machine is good down to .5mm pitch parts, and
Electronics Forum | Wed Sep 16 10:21:14 EDT 2015 | beta
Hi all, Is there much in the way of difference between a Fuji CP6 machine with the CE mark and a machine without the CE Mark? I know why the CE Mark is required within the EU but I am talking nuts & bolts here - is the machine any different? or is
Electronics Forum | Fri Jul 23 13:34:07 EDT 1999 | Scott McKee
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Fri Jul 23 14:17:55 EDT 1999 | Steve Schrader
| | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performin
Electronics Forum | Mon Apr 12 19:28:26 EDT 1999 | Tom B
Netters, When I reflow a PCB there is a discoloration of silkscreen and mask. It appears if Profile is too hot! But I dont think so, maybe I'm wrong? 1. Kester 293 no clean 2. 2.1 C/s for 30s to 150 C 3. .5 - .7 C/s for 60s to 185 C 4. 1.5 C/s u
Electronics Forum | Wed Oct 10 13:51:08 EDT 2007 | petep
Coilcraft has posted the following and I am wondering how you folks are handling the use of coils in a Water Soluble world. PCB Washing and Coilcraft Parts Coilcraft tests for resistance to solvents per the following specification: Resistance to s
Electronics Forum | Fri Jul 23 13:49:29 EDT 1999 | Bob Neverosky
| | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performin
Electronics Forum | Mon Jun 08 14:19:30 EDT 1998 | Gary Simbulan
Earl, et al, Boy things get old and cold around here fast. I promised more detail on my capactior problem and I thought I could drop something completely different in the same message and tell a tale of solder balls. First the caps. We still have
winsouce.jpg)
.gif)
.gif)
