Electronics Forum | Fri Jul 23 23:47:03 EDT 1999 | Scott McKee
| | | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not perform
Electronics Forum | Sat Jul 24 00:04:55 EDT 1999 | Scott McKee
| | | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not perform
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Wed Jan 09 17:03:44 EST 2002 | rob_thomas
We follow IPC-2221 recommendations for Au and don't have a problem as long as the Ni is under 150 microinches.This ensures a consistent process for us.Also we do plasma clean after SMt and prior to wirebond.That makes a big difference. Rob
Electronics Forum | Fri Dec 17 09:02:51 EST 2004 | patrickbruneel
No thanks Rob I don't want these jokers to come to the conclusion that humans are the biggest producers of CO2 simply by breathing. The good part is plants convert it back to O2. So I suggest y'all keep some plants in the greenhouse and we be fine.
Electronics Forum | Thu May 23 18:10:54 EDT 2013 | davef
I agree with Rob. These solder connections are unacceptable. BR, davef
Electronics Forum | Thu Nov 21 12:06:16 EST 2013 | rgduval
The last time I got corroded parts out of my wash was when my DI tanks were spent, and I was pretty much using straight tap water. Refreshing the DI tanks eliminated my issue. Hope this helps. cheers, ..rob
Electronics Forum | Fri Nov 02 12:49:33 EDT 2018 | robl
Has anyone tried producing domed joints for high voltage corona reduction on a selective solder machine? I'm guessing it probably won't work due to gravity, but worth a shout. Thanks, Rob.
Electronics Forum | Tue Jul 19 06:07:30 EDT 2005 | GS
Yes Rob, I would like to know the type of metal finisching like JST097 or IPC-1066 or IEC .... suggest to do. I would like to avoid i.e. to get Bismuth finish on components terminals that I still have to solder with alloy containing Pb. Also to ha
Electronics Forum | Tue Jul 19 08:51:29 EDT 2005 | GS
any thanks Rob, te specimen label Anglia is some thing complete and very helpful example. Hope Comp Suppliers will take care about the needs of Users (mainly if they are small EMS). To know how the terminals/leads are metal finisched is important f