Electronics Forum | Tue Dec 11 19:48:37 EST 2007 | arun2382
Hi, If I were working with a 75 um thick stencil, Is there a spec. as to what the maximum value allowed on actual solder height measurements? Stencil type: Laser cut and electropolished Solder paste type: Type 4 Sn-Sb Would the measured values va
Electronics Forum | Thu Sep 26 23:14:25 EDT 2013 | zsoden
We picked up this old (circa late 80s) Seho 1135 machine last year for next to nothing. It needed a bit of TLC to bring it back to working order but it's 99% working now. The only problem left is that we cannot get sufficient height from the delta wa
Electronics Forum | Tue Jul 18 09:56:20 EDT 2017 | svfeingold
Tsvetan that really is an amazing machine. I have looked at it but assumed it was way out of my price range. Is it really possible to get a new machine with 50-60 feeders for under $100k? That sounds like a steal. What is the maximum component heig
Electronics Forum | Tue Feb 11 12:59:06 EST 2020 | astarotf
Hi Steve Thomas Effectively by IPC-610 standard specifies in the "content 8.2.13 Quad Flat Pack Plastic Package - Without Terminals (PQFN), Table 8-13, page 8-84" which depending on the class of manufacture notes 2-5 of the table, which in theory do
Electronics Forum | Wed Feb 09 09:54:50 EST 2000 | JAX
Trying to place PTH components with an SMT machine is possible but maybe not plausible. Would you have to buy specialized tools and equipment for the job ( gripper nozzles ). Are the machines you have capable. i.e.. Would you need camera modification
Electronics Forum | Sat Dec 14 02:29:52 EST 2013 | padawanlinuxero
Hello I hope this helps For a component with axial leaded - vertical The clearance of the component body or weld bead above the land is 1.00mm (0.039in) Component body must be perpendicular to the board The overall height does not exceed maxim
Electronics Forum | Tue May 03 19:52:09 EDT 2016 | ttheis
OK, I forgot to import the new order into the task block builder but that didn't resolve the issue. I decided to reduce the height of the part in the definition from 510 mils (which it is) to 450 mils and it places without a problem. Its strange bec
Electronics Forum | Tue May 02 14:56:57 EDT 2006 | Tim
8.2.5.5 Flat Ribbon, L, and Gull Wing Leads, Maximum Heel Fillet Height (E). For class 3 the heel fillet cannot touch the body of a plastic component, except for SOICs and SOTs. Why is my question? What type of failure will be the result of solder
Electronics Forum | Tue Oct 05 02:24:58 EDT 2004 | darby
What config are you replacing? ie 1 machine, 2 x 3machine lines, 1 x 2 machine line etc. What do you want to place with it? I can't comment on the Contact machines having never used one. On Samsungs I will say this. For your own benefit consider the
Electronics Forum | Tue Aug 09 11:14:28 EDT 2016 | cyber_wolf
•Rated Speed of 40,000 CPH •140 - 8mm Device Locations •14" x 18" Max PCB Size PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm Board Thickness: 0.3 to 4.0mm Component capacity Up to 140 types (8mm tape) Placing rate 0.09 sec./component - 40,