Electronics Forum | Wed Apr 24 21:35:34 EDT 2002 | davef
Ooooo, much better. Tough to say, because of all the variables [ie, different materials, moisture level, temperature, etc]. Plastic encapsulated devices, especially IC, absorb water from the air, which is violently released during soldering. Typica
Electronics Forum | Thu Apr 25 09:27:03 EDT 2002 | fmonette
Michael, This concern is well covered in J-STD-033, section 8.6 Board Rework. "...If the component temperature exceeds 200C, the board may require a bakeout prior to rework..." In other words, you only need to worry about moisture related defects w
Electronics Forum | Tue Nov 01 15:26:43 EST 2005 | GS
Is it this your first experience of C-CGA RWK ? In order to approach a RWK of this kind of pakage it requires a capable process and clear operating procedure. In the past, the company who I use to work for, we rwkd plenty of this kind of CCGA. Earl
Electronics Forum | Mon Mar 19 08:56:17 EST 2001 | fmonette
One very important consideration in your situation is to determine if you have moisture sensitive components on these boards. If you have any device classified level 3 or higher then you have a very high level of risk associated with moisture sensit
| 1 |
.gif)