Electronics Forum | Mon Jan 17 12:16:02 EST 2000 | Brian W.
My old company (CM) ran SMT to 50ppm including some very complex boards. We established the normalizer number by: #components + #solder joints. As was stated earlier, the ppm for any given product is the result of many factors. You may get differen
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Fri May 09 09:46:11 EDT 2003 | emeto
Hi sergiovito , what do you mean by China or region.Indonezia is not a region. Asia is a big continent. May be East Europe(labor there is preferable too).Or you chose China because others did? You should make a research and to find what is an advant
Electronics Forum | Tue Oct 19 13:03:16 EDT 2004 | pjc
Electronics manufacturing moving to China is not about the labor man. You all don�t get it. It�s the material, and not just the electronics material either. Plastics and metal parts costs are lower. Labor costs are the smallest component of a produc
Electronics Forum | Mon Nov 25 00:45:35 EST 2013 | igorfo
Thank you for advice, But main concern how to detect the problems with BGA on SMT line, and how I can validate "good" or "bad" profile. PS: SPC said that process Cpk 2, temperature profile in the upper spec limit for TAL and peak temperature.
Electronics Forum | Wed Sep 01 06:18:05 EDT 2010 | grahamcooper22
Dear SMT Manufacturer, As moisture is eliminated as the cause then solder paste volume will probably be the main contributing factor. More paste means more chance of solder balls and more flux fumes that need to be evaporated to reduce voiding. Even
Electronics Forum | Thu May 07 19:29:40 EDT 2009 | kareal
Hi Davef, Do you means it is natural for tin diffusion to copper trace during SMT process? but I could not detect tin in UHAST T=0 unit, and the tin diffusion was found only in copper trace of C4 cage. Two question: 1) Could you tell me which pr
Electronics Forum | Tue Mar 24 11:20:18 EST 1998 | Earl Moon
| Anyone have an idea how small a via must be to inhibit significant solder volume escaping into the via? Typically, micro vias are drilled and plated to about .003" diameter. To avoid significant solder "drain off," they should be drilled as shallow
Electronics Forum | Wed Mar 25 16:38:21 EST 1998 | Steve Joy
We have successfully put .016" vias in .030" pads. There is no issue with .030" solder balls, since the actual volume of the .002" via in pad is small compared to the ball+solder paste volume. We did notice random bubbles where, apparently, the sol
Electronics Forum | Wed Mar 25 16:36:10 EST 1998 | Steve Joy
We have successfully put .016" vias in .030" pads. There is no drain off with .030" solder balls, since the actual volume in the .002" depression is low. We did notice random bubbles where, apparently, the solder reflowed and trapped the air in the
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
