Electronics Forum | Thu Sep 04 21:50:47 EDT 2003 | davef
We like to use "enameled wire" that can be stripped by hot solder. Formvar [105�C] will not do that. Formvar was designed to with stand the hot oil seen in transformers. So, it requires either chemical or mechanical stripping. Most polyurethanes
Electronics Forum | Mon Oct 04 13:17:03 EDT 2004 | Mike Khosh
I have designed a tool that works great on magnet wires. I am in the process of applying for patent. The tool will work on ml coated magnet wires (36-45 AWG). If you are intersted, please send an email to mkhosh@bellsouth.net.
Electronics Forum | Thu Sep 04 16:48:08 EDT 2003 | coeps
I am shopping for a fine magnet/manganin wire stripper. Something to strip a variety of coatings from Formavar to Teflon off of 30awg and up wires. Something easy to use and set up. Anyone got one they can recommend? Thanks coeps
Electronics Forum | Thu Sep 04 19:20:39 EDT 2003 | severs
Fine magnet wire responds well to abrasion stripping. Here's one I've used: http://www.carpentermfg.com/magnet.htm Teflon requires a different kind of stripper called a twin blade rotary stripper or a precision die stripper because it's subject to
Electronics Forum | Fri Mar 11 10:00:22 EST 2005 | ???
Anybody out there know of a good (2nd) source to purchase single magnetic board supports used on quad/samsung machines. These are spring loaded and contact the underside of the board in the pick n place machine
Electronics Forum | Fri Jan 14 03:52:34 EST 2000 | Scott Davies
To any users of Camalot Adhesive Dispensers... Do any of you know where I could get hold of the spring loaded magnetic board supports used on, for example, the 3800 machine. Camalot's representatives here in the UK, Speedline, are asking a ridiculou
Electronics Forum | Thu Feb 16 21:22:12 EST 2006 | davef
It is quite common for this to be done with an activator cured acrylic adhesive (eg, Dymax, Loctite, Permabond). This method took over from mechanical clips and epoxy some years ago because using: * Mechanical clips changes the magnetic circuit. * Ep
Electronics Forum | Thu Jul 27 00:40:34 EDT 2006 | Habibooboola K. Halaliliaholiokeebob
I have a production defects on smt mounted spring that the designre at my compnay is try.the spring act as conduction between the resistor capacitor network and mount with the prefrom and then reflow thru the oven. the design intent for spring is mec
Electronics Forum | Mon Sep 20 12:24:18 EDT 2010 | remullis
Can you remove the interlock mechanism that makes the switch from the hood insert into the switch and trick the machine then close the hood palm down and put everything back? Some machines use magnets, some use the slotted switch with a metal key t
Electronics Forum | Tue Sep 12 01:54:57 EDT 2006 | AR
I assume that you are referring to the same kind of mechanical feeders (older type) that are used on the Philips (Assembl�on) Topaz as well. First make sure that the right gear pulley spring is set to its stiffest position (the loop at the end of the
.png)
