Electronics Forum | Fri Nov 19 01:55:44 EST 2004 | Chics
Hi, Is anyone aware of the Mesh sizes(Screen Printing) that are against specific silver particle sizes. Like in case of solder for different types of paste, different mash sizes are recommended. Is anyone aware of any such things in the case of silve
Electronics Forum | Tue Nov 30 11:09:16 EST 2004 | fcox
Mesh opening size may be a factor in whether or not the paste will pass but only in very fine line deposition. Generally speaking, the printed line width and deposition thickness determine what mesh to use. The paste supplier will be able to tell you
Electronics Forum | Mon Nov 22 11:19:39 EST 2004 | davef
Short answer: Yes. Depending on the application of the conductive ink, suppliers select different mesh for the silver particles. So, you should follow your supplier's recommendations for printing, for instance: Conductive Ink||PI-2000 Highly Condu
Electronics Forum | Thu Jun 02 10:54:12 EDT 2011 | davef
Al: We agree with AVFOM. You have a different problem than solder paste mesh selection. Most often, tombstoning occurs when the wetting forces on the two pads are unequal. Examples of things that can cause this are: * Pads are different * Board pad
Electronics Forum | Wed Aug 29 03:16:20 EDT 2018 | cannizzaro
It is recommended that the thickness of the stencil of 0.1mm, the steel mesh should be partially nano-coated. It is best not to dry easily, and the particles are not easy to be too large. I have tried ALLPCB for this kind of BGA in the past and they
Electronics Forum | Thu Apr 22 08:42:40 EDT 1999 | ADRIANO FERNANDES
I would like to known what�s MESH SIZE mean in the solder paste specification ?
Electronics Forum | Thu Apr 22 11:44:30 EDT 1999 | Chrys Shea
| I would like to known what�s MESH SIZE mean in the solder paste specification ? | | Check out the thread from 4/14/99 on solder FINES vs. solder balls. The info you're looking for is in there.
Electronics Forum | Fri Apr 23 12:09:47 EDT 1999 | JJA
| | I would like to known what�s MESH SIZE mean in the solder paste specification ? | | | | | Check out the thread from 4/14/99 on solder FINES vs. solder balls. The info you're looking for is in there. | test
Electronics Forum | Thu Mar 04 07:35:38 EST 2010 | rajeshwara
Plz tell me Stencil Thickness ? Solder Paste ? Mesh Size ? Partcle size/type? Viscosity?
Electronics Forum | Fri Apr 23 12:26:27 EDT 1999 | Jeff Anweiler
| | I would like to known what�s MESH SIZE mean in the solder paste specification ? | | | | | Check out the thread from 4/14/99 on solder FINES vs. solder balls. The info you're looking for is in there. | "Mesh Size" is a term that is commonly use
