Electronics Forum | Wed Feb 23 07:53:48 EST 2000 | John
Anyone out there have any experience with paste dispensing equipment? With our high mix of baords and very low volume (
Electronics Forum | Wed Feb 23 07:53:48 EST 2000 | John
Anyone out there have any experience with paste dispensing equipment? With our high mix of baords and very low volume (
Electronics Forum | Fri Jun 14 14:32:05 EDT 2002 | davef
There is no real reason why you shouldn�t use your current paste. Paste for printing usually is a coarser mesh than paste for dispensing. Dispensing paste is more expensive, because of the mesh and the packaging, but that doesn�t matter now. Compa
Electronics Forum | Tue Jun 15 19:14:51 EDT 2010 | hegemon
You also need to consider the total metal load in your dispensable paste. You'll need a slightly higher flux content and less metal, say around 87% total metal, in a 4 or 5 mesh size. We had to have some special mixes made in order to do fine pitch
Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Wed Apr 15 11:15:42 EDT 1998 | Rick Zak
Have mixed technology board and am interested to hear any info on the Nordson non-contact adhesive dispenser. I woud appriciate any feedback I could get. I am currently using a contact system and am tired of breaking needles and need a way to speed u
Electronics Forum | Mon Jun 05 12:30:24 EDT 2017 | deanm
Mike, The dispensable solder paste is ordered separately from the printed paste because it has a higher flux content. I would not feel comfortable mixing liquid flux into the printable paste. Ask your paste vendor if they have a dispensable version.
Electronics Forum | Thu Nov 15 07:59:53 EST 2001 | John S
My company is in the process of evaluating dispensing/screen printing vendors for a new production line that will build a mixed through hole and smt board in high volume. DEK recently came out with a system that uses a thick plastic stecil with mach
Electronics Forum | Sat Apr 18 10:29:47 EDT 1998 | Steve Gregory
| Have mixed technology board and am interested to hear any info on the Nordson non-contact adhesive dispenser. | I woud appriciate any feedback I could get. I am currently using a contact system and am tired of breaking needles and need a way to spe
.gif)
winsouce.jpg)