Electronics Forum | Wed Feb 19 06:20:05 EST 2014 | bandjwet
These micro ablation stations can be outfitted with air ionizers and you can use less electronegative materials like corn starch as the blast media. Laser ablation works on parylene and other coatings when on metal surfaces. BWET
Electronics Forum | Tue Feb 03 15:14:58 EST 2015 | stevezeva
This is a late reply, but from my experience a really good removal station is one made by a company called CCRCo. They make a micro-abrasive station that addresses all the ESD concerns. They utilize a reusable media that is really cost effective. The
Electronics Forum | Mon Nov 21 20:21:04 EST 2022 | emeto
You can try strip it with Chemically (like Acetone) or micro-blasting.
Electronics Forum | Sat Apr 12 09:47:07 EDT 2003 | davef
... continuing with Q2: How do you remove and replace? A2: Belt sander, sand blasting, grinding wheel, etc. Parylene/Paraxylyene is a great coating and can be selectively removed by several methods. The IPC-7711 (Rework of Electronic Assemblies)
Electronics Forum | Fri Jun 03 16:35:40 EDT 2005 | davef
We've never tried to remove Paraylene from a BGA, but we stayed [in seperate rooms] at the Red Roof Inn. Parylene/Paraxylyene is a great coating and can be selectively removed by several methods. IPC-7711 (Rework of Electronic Assemblies) has a sect
Electronics Forum | Mon Dec 22 18:20:33 EST 1997 | Graham Naisbitt
Brett and Chis, The method I understand to be the most popular is the use of micro-blasting or abrasion. In other words mechanical rather than chemical removal. However, that is only part of the problem - how do you repair the coating? The technique
Electronics Forum | Fri May 26 04:58:19 EDT 2023 | auriga2001
I agree with the two other replies. Left alone, it is a defect. If it's just excess adhesive or coating, you can use IPC-7711/7721 'Rework, Modification and Repair of Electronic Assemblies' for guidance on removing. Section 2.3.1 explains how to te
Electronics Forum | Thu Oct 22 15:10:00 EDT 1998 | Chris Fontaine
| I'M LOOKING FOR A SOLVENT TO MAKE REMOVING EPOXY FROM THE BOTTOMSIDE OF BOARD ON SMT COMPONENTS. THIS IS MOST IMPORTANT AFTER THE EPOXY HAS CURED AND EVEN RAN THROUGH THE WAVE. I'M LOOKING FOR A WAY OF | MAKING THE REWORK PROCESS ON THE CURED EPOX
Electronics Forum | Tue Dec 08 17:55:51 EST 1998 | Dave F
1. What is the best way to remove polyurethane conformal coating from selected areas? Your conformal coat material supplier is best equipped to tell you how to remove the coating. Polyurethane conformal coating is not easy to remove. Without in-pu
| 1 |
