Electronics Forum | Tue Aug 28 11:03:40 EDT 2012 | mikesewell
The problem is still intermittent. It has a new MIDAS head, installed and calibrated by Mydata, FWIW. Usually we work around it by moving parts upstream (Fuji AIM). I'll post an update when I finally chase the issue down.
Electronics Forum | Tue Jul 05 22:10:42 EDT 2022 | nellegaard
I am currently trying to setup a used MyData My19 machine and am currently having issues installing tools getting errors such as failed to pick up tool and Z force sensor failed. I have tried to clean the tool pickup area as well as clean and lubrica
Electronics Forum | Tue Jul 17 10:09:48 EDT 2012 | cyber_wolf
Phil is on the right track. Try this.... Go into the service program, and bring up the vacuum force indicators. Manually install a spring loaded tool into the Midas head. Once the tool is in the head, press on the tip of the nozzle with your finger.
Electronics Forum | Wed Sep 18 15:40:12 EDT 2013 | pankalaitz
Hello, we have problem with indicator. When we manually install a spring loaded tool into the Midas head, the force remain at 180. We can't use spring tools. Can you advise me how can we calibrate the force indicator and what else should I try to fix
Electronics Forum | Tue Jan 23 17:22:45 EST 2024 | tomdegas
For some reason I cannot load any tools on my MY12 machine. The machine goes through the motions like its loading the tool (grabbing it and putting it back) but at the very end it moves the carriage all the way to the right and wants me to put the t
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Fri Jan 05 17:21:54 EST 2024 | tomdegas
The issue is with the Midas head. It gives me the same error with any tool I try to install.
| 1 |
