Electronics Forum | Tue Apr 12 04:37:52 EDT 2005 | chandran
1.Can anyone explain to me what is the clean and non clean solder? 2.What is the standard solder paste height spec for stencils 4mils,5mils and 6mils? 3.Whatis the meaning for ROHS?
Electronics Forum | Thu Jul 14 11:44:18 EDT 2005 | Tom
Thanks Again Everyone! One more question... Do you suggest to use 5 mil stencils? My existing stencils are all 6 mil and 8 mil. Should I change them?
Electronics Forum | Fri Feb 24 09:20:44 EST 2006 | jdengler
Kenny, Why are you using a step? The components you list could be done with the 7 mil stencil. I would use 6 mil myself but I assume you may need the 7 mil for other components you do not list. Jerry
Electronics Forum | Thu Mar 02 13:29:30 EST 2006 | russ
6 mils maybe? instead of 6mm? We go down to 5 mils and up to 7 with 0603. You could even use a 4mil stencil for these without any problems. The .2mm (.0078")apart however might get you in trouble unless your equipment is rock solid.
Electronics Forum | Mon Jun 18 10:02:26 EDT 2007 | dyoungquist
5mil should work fine. Some stencil manufacturers charge more if you go less than 5mil so stick with 5mil.
Electronics Forum | Mon Jan 14 08:56:30 EST 2008 | geb
Hi, The machine is a Universal GSM1 flexhead. Is it possible to just change the lens of a 2.6mil camera for a 1mil or 0.5mil lens. Or do I have to buy a complete camera assembly to do this? Thanks, Grant
Electronics Forum | Wed Apr 09 19:58:40 EDT 2008 | diesel_1t
conveyor speed: 30 in/min. 8 zones stencil thickness 6 mil for most, for the one with 0402 5 mil (due to a 20mil pitch QFP) laser cut. thanks.
Electronics Forum | Tue May 11 13:39:08 EDT 2010 | smt_guy
yes sir you are right. at least 10 mil diameter endoscope. thanks and regards
Electronics Forum | Mon May 24 19:40:17 EDT 2010 | smt_guy
thank you very much guys for those info...I found one and the smallest is 25mils
Electronics Forum | Thu May 20 16:30:50 EDT 2010 | mikesewell
I believe industry standard is 1/2 pitch for fine pitch devices. If your part is 20 mil pitch, apts would be 10 mil wide. This should gasket fine to the pcb pad and with a 5 mil stencil should print well.