Electronics Forum | Mon Oct 22 08:54:27 EDT 2007 | rgduval
Michael, You're right, of course. A major mis-type on my end. What I meant to say is that no-clean fluxes are designed to not _require_ cleaning to meet industry cleanliness standards. Cheers ..rob
Electronics Forum | Sun Jul 29 09:17:20 EDT 2001 | davef
Tough to say, but ... Chlorine: Many fluxes contain chlorine. Sulphur: Many solders and paper packing materials contain sulphur. Sodium: No idea. IPC-J-001 talks to board cleanliness and specifies criteria according to the cleanliness test met
Electronics Forum | Thu Apr 18 17:00:05 EDT 2002 | JamesL
We do cleanliness testing each morning using a Zero Ion tester. Our pass/fail number is set at 37ug/square inch NaCl. We are rarely above 10ug/square inch NaCl. We use Aqueous flux. Our inline washer has a prewash (70psi@130 degrees F), wash (?psi),
Electronics Forum | Thu Jul 08 19:58:18 EDT 2004 | rtaft
Hello, I have been tasked with updating our PCB cleaning sytem, of which I know little about, and could really use some advice. We are a small company and we hand solder our electronics to IPC standards. Our electronics are mission critial communic
Electronics Forum | Thu Dec 16 09:59:47 EST 2004 | saragorcos
Hi there - unfortunately, there are no good cleanliness specs available mainly because clealiness requirements are case sensitive - you should talk to Terry Munson at 765-457-8095 - he can definitely give you advice on Ion Chromatography, SIR, ROSE t
Electronics Forum | Fri Aug 30 22:51:14 EDT 2013 | cvogel
IPC-J-STD-001E in regards to Ionic Cleanliness standards states less than 1.56 µg/cm² of total NaCL. Assuming a typical electronic process which involves smt, wave, and post-hand soldering and uses NO-Clean flux throughout all process, is it typi
Electronics Forum | Tue Sep 05 16:04:43 EDT 2000 | Dave F
Pascal: Responding to your questions: 1 Do we have to dry the PCB after cleaning (sic)? Generally, nothing says you have dry the PCB after aqueous cleaning. Along this line, I received several thoughtful responses when I posted a similar thread.
Electronics Forum | Mon Jun 11 22:06:00 EDT 2001 | davef
The issue is not the cleanliness of your in-bound water. The issue is the cleanliness of the board your customer receives. Look at J-STD-001C, Para 8, "Cleanliness Requirements". The end product cleanliness is the end result of your: * In-bound
Electronics Forum | Sat Jun 13 07:08:46 EDT 1998 | Dave F
| Is their an IPC standard for the water that is being used in the water wash. I have been looking and at this time have not found any thing. Steve: A lot of the old command and control specification environment has changed with the "industrializati
Electronics Forum | Mon Oct 23 21:05:37 EDT 2000 | cklau
If you're looking for PWB cleanliness , please consider one surface treatment other than HAL (i.e HRF-heat resist flux). HRF is a very inexpensive and effective process that your board manufacturer can provide you to meet your requirement. For gold