Electronics Forum | Thu Sep 24 08:05:59 EDT 2020 | majdi4
In my opinion, it is not possible to eliminate the oxidation in a component because oxidation it is not removable .. the only solution is to apply a mechanical operation (scraping) and then tinning the part..
Electronics Forum | Wed Sep 23 00:06:34 EDT 2020 | SMTA-64387098
I have modules that come with a 4 x 2 pin header. The problem is the pins must be oxidized as they do not take solder (no wetting occurring). This occurs whether solder in our wave soldering machine or soldered by hand. I tried cleaning the module i
Electronics Forum | Thu Sep 24 12:59:59 EDT 2020 | davef
If whatever is preventing the leads on your component from wetting is oxidation, cleaning the component will not help. Consider trying a more active flux prior to soldering. Understand from your supplier the potential complications that may affect
Electronics Forum | Sun Aug 29 19:17:34 EDT 2004 | aqueous
Chen, It is always best to place one�s effort on determining the cause and content of the residue rather than trying to work around it. The first thing you must determine is the nature of the residue. Is it flux? In many instances, the residue is
Electronics Forum | Thu Apr 20 03:50:35 EDT 2017 | cromaclear
To overcome the dewetting issues of the past, a number of techniques have been used such as alternating directions on the wetted nozzle; this helps to avoid the solder biasing to one side causing the other side to oxidize and de-wet. Another method o
Electronics Forum | Tue Mar 30 12:56:42 EST 2004 | Robert
Looking for trays that can hold Dual in Line Sockets that come in 24pins and 28 pins. The parts are from Mill-Max numbers 214-99-624-01-670800 and 214-99-628-01-670800. I get these in tubes but need them on trays. If anyone uses these parts or SMD
Electronics Forum | Fri Sep 21 13:04:58 EDT 2007 | jmelson
Hello, Is anyone using an SMT pick&place machine to insert single contacts into PC boards? I have some boards that have 32 female contacts for 1mm pins, and 16 contacts for 0.5mm pins. I have been using Mill-Max for these contacts, getting the sma
Electronics Forum | Fri Sep 18 21:37:50 EDT 1998 | Jeff Sanchez
| Good Morning, | I am looking for an alternatve to the traditional press in low profile sockets, aka Augat Holetites. I am looking into Mill-Max parts. any suggestions? They are used on the backplanes we build. | Thanks, | Wendy Mill-Max
Electronics Forum | Thu Apr 29 17:52:33 EDT 2021 | mike_infl
We have an assembly which we are trying to machine pick and place a Mil-Max pin that is .020 dia placed in a .026 hole. The board is .1125 thick. We have to place 106 of these pins. Without going into the challenge of getting proper hole-fill to me
Electronics Forum | Fri Oct 10 14:49:21 EDT 2008 | omid_juve
what is the best solder paste type(RA,RMA,R,WS,...) for removing oxidation from the pins of our parts.
.gif)
winsouce.jpg)