Electronics Forum | Wed Jun 13 12:54:41 EDT 2001 | Dr. Harry
Does anyone have PCB thickness recomendations for .8 &1.0mm pitch bga's?
Electronics Forum | Fri Dec 12 01:06:02 EST 2003 | kenny
Dear folks; I am currently looking a PCB manufacturer who can fabricate PCB with the following specification:- Board sizes: _20000__ x _20000__ mils Thickness: 125 mils PCB material: FR4 Surface finish: 30 microinches Gold over 200 micro inches Nic
Electronics Forum | Wed Aug 09 09:54:36 EDT 2006 | russ
Use ENIG, plated finish will be too thick and make for a brittle joint. ENIG is self limiting so this condition cannot be present. To ensure that the bond is strong for BGA you must ensure that process is under control. The correct reflow profile w
Electronics Forum | Mon Apr 23 17:30:08 EDT 2001 | davef
Step 1: Print paste on the board, skip placement, reflow the board, check solderability. Step 2: Goto Step 1. White Tin Solderability: The most common reason for solderability issues with the white tin surface coating during multiple thermal excur
Electronics Forum | Mon Dec 31 09:00:06 EST 2001 | davef
Baking before assembly does nothing good. It: * Increases costs. * Adds steps to the process and makes scheduling more cumbersome. * Increases the amount corrosion on solderable surfaces. We used to bake to remove the moisture from boards that caus
Electronics Forum | Fri Aug 21 00:27:09 EDT 2009 | boardhouse
Hi To Start Min Tg is just a portion of picking a lead free material, the other is Td. We recommend the following to our Customers. 2-8 layer 150 Tg. Min. / 340 Td. 8-Up. 170-180 Tg.Min. / 340 Td. The above recommendations have been used by man
Electronics Forum | Sun Aug 23 11:30:51 EDT 2009 | ysutariya
I think you're getting steered in the wrong direction, with the exception of DaveF's link. By the way, I'm a PCB fabricator, just to avoid any backlash. IPC 4101 is the IPC guideline for raw materials. It has 6 slash sheets for lead-free capable
Electronics Forum | Thu Jun 29 09:29:46 EDT 2000 | JAX
sree, You might want to check the archives. If not, I found this just a few questions below yours!! [Back to thread listing at top] Posted by Igmar on June 22, 2000 at 10:27:26 AM EST Can someone please help with the aperture size on a Micro BGA st
Electronics Forum | Wed Jul 13 09:38:21 EDT 2022 | madisreivik
Page 18 http://www.mpk-pcb.de/en/download/mpk-kemmer-pcb-tools-catalogue-2019/ And maybe try "downforce" EA30-L type, as the cutting path is very short. Short lengths you can cut dry. Just use manufacturers recommended feed/speed and DO NOT reduce
Electronics Forum | Thu Jun 22 10:27:26 EDT 2000 | Igmar
Can someone please help with the aperture size on a Micro BGA stencil. I want to have an electroformed stencil made with 0.1mm (4mil) thickness. The PCB pad for the micro BGA has a 0.406mm (16mil) diameter. What size should I make the apertures for t
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
