Electronics Forum | Fri May 02 11:09:13 EDT 2014 | pawloa
Hello. We have a Minipak 300 wave solder machine from Electrovert and are looking in particular for a tachometer that attaches on the finger conveyor motor to measure the speed in pulses. We are also looking for the thermocouple that is used to moni
Electronics Forum | Wed Jan 03 13:04:52 EST 2007 | smtspecialist
Hi! Does anyone out there has a spare solder pot for sale for an electrovert minipak 300?
Electronics Forum | Wed Jan 17 15:17:19 EST 2007 | jsloot
We have a minipak for sale. Please contact me
Electronics Forum | Thu Jan 18 07:13:28 EST 2007 | smtspecialist
Thanks for the offer but the one I have is working well now that I got a brand new bath made and I don't need a second Minipak. Thanks again!
Electronics Forum | Mon Jan 08 15:33:07 EST 2007 | jsloot
We may still have one in storage. I will check for you.
Electronics Forum | Tue Nov 29 17:27:38 EST 2016 | dyoungquist
We have been using SN100C in our RPS Rhythm selective solder machine since we bought it in 2008 with good success. No issues with the solder pot. We are setting the pot temperature to 300C.
Electronics Forum | Thu Jul 06 04:41:58 EDT 2006 | Rob
MF300S is quite an old flux, & a lot has happened since then on the flow solder front - are you sure it's designed for Lead free, or is it just a traditional flux that SHOULD work OK with Lead free?
Electronics Forum | Mon Jul 10 09:25:47 EDT 2006 | nodlac
Here is a nugget from the Data Sheet... Wave Soldering: Excess moisture on the PCB during soldering may lead to random solder balling and poor wetting of some solder joints. IT IS IMPORTANT that the flux solvent carrier (water) is fully evaporated a
Electronics Forum | Fri May 18 04:40:51 EDT 2007 | gregoryyork
Wash them in Saponifier frequently at around 40C rinse and dry thoroughly. I would imagine it could be going white if you have a resin system in the flux that is not water soluble. Ensure you are using suitable pallet material up to 300C for Lead Fre
Electronics Forum | Thu Jul 06 03:03:56 EDT 2006 | ronalds
Thank you all for your input. The MF300S Multicore flux is rated for lead free. There is not much dross or contamination. We are using nitrogen. I've tested the boards with the curing test of IPC-TM-650. I think you're all right about the preheat.