Electronics Forum | Fri May 17 04:26:13 EDT 2013 | eniac
I don't know about Universal GSM, but for my Mirae's nozzles I use IPA and small US-bath.
Electronics Forum | Thu Jan 09 08:40:37 EST 2020 | raeesrajput
Hi Every one, Thanks in advance for your help and support. I am getting errors 'Nozzle pick up error' and 'Nozzle release error' on Mirae Mx350. I have been told to calibrate Nozzle Holes using 'ANC' option in the Menu. Ther
Electronics Forum | Wed Jun 09 17:41:40 EDT 2004 | stevecrowley
Does anyone know of a 3rd party that manufactures the Mirae spindle? We have 5 broken nozzle spindles that need replacing. Also in need of renting or borrowing the Head Offset Jig so as when replacing said spindles we can measure the camera to nozzl
Electronics Forum | Mon Jan 13 08:35:51 EST 2020 | griinder
The holes are calibrated in MSetup. Generally, I have never had luck using the auto teach for the nozzle changer. We would teach them each manually. Before doing this, you need to narrow your issue down a bit more. Which head gives you this error?
Electronics Forum | Fri Aug 26 10:44:37 EDT 2022 | gfe
In the Mirae machine we can give an individual delay for each component, in this case the delay in Z is in all of them, the nozzle stays on top of the component for a long time, this happens in any program, could we have accidentally changed some con
Electronics Forum | Wed Apr 24 07:16:50 EDT 2019 | griinder
Here is a newer procedure I found, that is more in depth with better illustration. The nozzle jig, is also used for proper Z calibration, and is pictured in this service procedure.
Electronics Forum | Thu Jun 10 15:50:07 EDT 2004 | jperrotta
Hello Steve, Tyco Electronics Automation Group is the exclusive 'stocking' distributor of Mirae SMT assemblers in the Americas and Europe. We also effectively support all customers who own Meridian assemblers (also Mirae) in both regions of the worl
Electronics Forum | Mon Mar 25 09:26:16 EST 2002 | stefwitt
you should also look into the different placement methods and their advantages and weaknesses. A chip shooter with a rotary head and lets say 18 nozzles always places one component and picks one at the same time. PC board and feeder table move while
Electronics Forum | Wed Apr 24 07:06:56 EDT 2019 | griinder
You need two calibration jigs to calibrate these cameras. There is an L-Type align offset jig that involves removing the front feeder base, and placing the target dot over the middle camera of your front camera bank. After this calibration is done, t
| 1 |
winsouce.jpg)
