Electronics Forum | Fri Nov 05 10:59:30 EDT 2010 | methos1979
I have had my system for three weeks now. It is an MV3L. It is running version 4.5.0 build 2.1.2 software and it is very stable. I have not had a single crash. We are not a board manufacturer but rather use our system to inspect both populated an
Electronics Forum | Tue May 22 07:55:05 EDT 2012 | rway
Although not listed in your post, I recommend YesTech. I have been using them since 2007. We have two M1 systems, and they have been good machines. We evaluated three: YesTech, Mirtec, and Christopher. Of the three, the YesTech system caught more
Electronics Forum | Mon May 30 11:37:01 EDT 2005 | stepheniii
I don't know this machine but I have seen a similar problem on other machines. Have you cleaned and lubed the guide rods for the x-axis? It's easy to forget that AOI machines do need some maintenance. Is it possible that it hangs, while waiting for t
Electronics Forum | Tue Jan 25 14:12:55 EST 2011 | rodrigo
Hi All, I've been working with this machine for several weeks. I read the manual and I'm using the autoprogramming (ATT) with centroid data. I have a question regarding the teaching of the parts. Let's say I have 10 capacitors on the PCB that are th
Electronics Forum | Wed Dec 29 13:45:08 EST 2010 | methos1979
Chris, The red/blue filter as you call it (on the MV3L it's called HorzVert Sum I think) has become my go-to light source view for manual visual evaluation of flagged solder defects. Of all the lighting sources available, this one gives me the best
Electronics Forum | Mon Aug 22 10:21:55 EDT 2016 | philc
If you set the "Base Window" (ie - body of the component) to by viewed by the vertical light, it will give good contrast, and ours usually detects the missing metallization from one or other end, but only on the top-side, obviously. If the metallizat
Electronics Forum | Thu Nov 04 19:42:21 EDT 2010 | eadthem
We do almost exclusively SMT parts but for solder with a 45 degree fillet angle use vertical light type and a binarise threshold of 128(1/2 dark 1/2 light) and use the 2nd option or dark=dark light=light _|" in vertical light solder fillet is dar
Electronics Forum | Thu Dec 18 14:54:28 EST 2008 | hegemon
We evaluated OMRON, YesTech and Mirtec. Mirtec and Yestech close at #1 and #2. Omron was a little more distant due to programming time required. We are a high volume high mix OEM builder, so speed of programming was a heavier weighted score than co
Electronics Forum | Fri Oct 17 14:26:39 EDT 2008 | hegemon
We use Mirtec MV-7s for post SMT inspection of solder joints as well. The artistry is in the program debug. We are very pleased with the solder inspections provided by these machines, and technology having advanced bit, most every AOI machine has t
Electronics Forum | Fri Nov 05 10:35:18 EDT 2010 | methos1979
This was a great post from another thread here with some tips: Date: November 04, 2010 07:42 PM Author: eadthem Subject: Who has best desktop AOI ? We do almost exclusively SMT parts but for solder with a 45 degree fillet angle use vertical light
