Electronics Forum | Thu Jan 13 20:40:47 EST 2011 | eadthem
properties > settings > troubleshooting > Set hardware acceleration to NONE > apply OK apply OK reboot. without this any attempt to take a screen shot of the program will not save the image (because in a fruitless attempt to speed it up they have pr
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
Electronics Forum | Mon Feb 07 18:12:56 EST 2011 | eadthem
I do not know what software version you have, but on older versions it is best to have a mounting inspector set to be the primary and then mask out all labels and solder so it just locates the part. Then add another mounting inspector for looking at
Electronics Forum | Mon Jan 10 18:35:05 EST 2011 | eadthem
Ive used a Mirtec machine for 3 years MV3L with side angle inspection. Mirtec has some issues documentation, and repair plus. But there machine is impressive and the AOI software is good. We can find about 90-99.99% of all errors using just the 5
Electronics Forum | Tue Jan 25 14:12:55 EST 2011 | rodrigo
Hi All, I've been working with this machine for several weeks. I read the manual and I'm using the autoprogramming (ATT) with centroid data. I have a question regarding the teaching of the parts. Let's say I have 10 capacitors on the PCB that are th
Electronics Forum | Fri Nov 05 18:47:31 EDT 2010 | eadthem
I'm guessing when you say bare board you mean wet paste only? When you say the pads move slightly are your boards warped at all at the Vscore? What we do is use per modual fids. first you delete or don't make panel fids and then theres a option wh
Electronics Forum | Thu Nov 04 19:42:21 EDT 2010 | eadthem
We do almost exclusively SMT parts but for solder with a 45 degree fillet angle use vertical light type and a binarise threshold of 128(1/2 dark 1/2 light) and use the 2nd option or dark=dark light=light _|" in vertical light solder fillet is dar
Electronics Forum | Thu Feb 17 18:15:57 EST 2011 | rodrigo
Hi All, Does the Inspector software have a library manager? I see a "Standard" and an "Alternate" library folders. The standard library shows the outline (like a footprint) for the components but the alternate library has pictures and outlines with
Electronics Forum | Fri Aug 07 14:52:43 EDT 2020 | glasscake
Does anyone have a comprehensive manual or some pages on how to setup/how the laser height functions work on a Mirtec MV-7U? (Mirtec Inspector 4.5.6) Even a sentence describing what each input for these tools do would be amazing. I FINALLY was able
Electronics Forum | Thu Sep 03 19:05:05 EDT 2020 | stephendo
Get in touch with this guy. I met him several years ago, he is a great guy and will no doubt help you, one way or another. Mr. Brian D'Amico President Cell: 203-232-9343 E-Mail: b.damico@mirtecusa.com
