Electronics Forum | Wed Aug 12 14:35:33 EDT 2015 | ehess
having a problem with several heads miss picking 8mm feeder parts. Had to bypass 2 of the heads because it was becoming such a hardship. Heads 3, 4 (bypassed), and 8 (bypassed). On 3 and 8, it will miss so many it errors, and when I clear the erro
Electronics Forum | Thu Sep 29 18:57:14 EDT 2016 | vchauhan
Is it ok to re-print the mis-print PCB? Personally I am oppose to re-print the mis-print board. For two reasons. 1. You will end up adding solder paste on the bottom side of the stencil. 2. You may smear solder paste in some area. But I would like to
Electronics Forum | Mon Oct 03 07:38:36 EDT 2016 | cyber_wolf
We successfully re-print mis-prints all of the time. We have SPI machines at every printer that let us know if it is OK or not. Sometimes dealing with the solder defect is better than cleaning the mis-print. It is very difficult not to wedge solder
Electronics Forum | Tue Feb 15 12:49:42 EST 2005 | O.Tarango
we are experiencing a lot of components mis-aligned , Can anyone suggest me some causes of this defect. regards
Electronics Forum | Fri Feb 18 08:49:22 EST 2005 | Mark
This is brutal. O.Tarango, I think the techs on this forum need a bit more detail from you. There are only a million or so possibilities why your components are being mis-aligned.
Electronics Forum | Mon Feb 21 13:21:57 EST 2005 | O.Tarango
Firstable, thanks for all your comments,sorry if my question was too un detailed, I really need your help on this, actually we are using a 4796 HSP in our SMT process most of the incidences of mis aligned component are on two 0420's capacitors Rega
Electronics Forum | Thu Dec 08 03:22:34 EST 2005 | khp_armin
Please give mesome guidelines for our pick and place machine (Juki)because we always encounter mis-alignment and missing components.
Electronics Forum | Sat Oct 08 12:42:10 EDT 2016 | ttheis
Well I stand corrected; we tried re-printing mis-prints on Friday with our auto printer and indeed it worked out very well. I did let the paste dry up a bit on the mis-printed board while a few others went through to try and prevent smearing as it re
Electronics Forum | Wed Oct 23 14:33:44 EDT 2002 | lhoang
Any one encountered the problem such as poor conductivity when the silkscreen mis-registrated on the solder pads ? Thanks; Linh
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2762 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
