Electronics Forum | Tue Sep 10 10:38:12 EDT 2013 | rway
Most of the PTH components are manually inserted. Some are auto-placed by our UIC machine. The parts are preped before install, so there is no need to trim the leads afterwards. The boards go through wave solder. The UIC machine has a clincher on
Electronics Forum | Tue Feb 16 11:50:54 EST 2010 | remullis
I am currently placing LED's with a RAD 5 machine and developed cutting problems with a specific LED. I am not having problems with other similiar LED's where only the color is different. After dispensing to the clip all is well. After going through
Electronics Forum | Mon Mar 12 09:25:16 EDT 2007 | rgraves
Our internal designers are employing SMT connectors that utilize a �PCB positioning boss� in conjunction with normal gull wing leads. The use of these devices is based on the advertised ability of the boss to prevent �mis-insertions� and assist in �
Electronics Forum | Thu Feb 10 09:39:47 EST 2005 | jdengler
Primus, Operators should NEVER have the ability to alter patterns. The altering of a known good pattern is a serious event and should be given careful thought before it is done. I worked at a company that operated UIC equipment 3 shifts a day 5 da
Electronics Forum | Fri Aug 31 16:30:27 EDT 2007 | gmoritz
> > you may wish to do program off-sets per rotation ... I responded: > > You went over my head with that one. ... Steve Thomas helpfully added: > ... can reach that screen with SH SET command, Since I have not yet located a programming manual
Electronics Forum | Mon Jul 30 15:28:25 EDT 2007 | gmoritz
I'm posting a diary of the major repair experience that we had this weekend. I'll follow up with a shorter post that sort of summarizes a few things. ------------------------------------------------ The service guys showed up at our facility about
| 1 |
winsouce.jpg)
.gif)
