Electronics Forum | Thu Jul 01 03:36:23 EDT 2010 | sibbe
Dean, As u use intelligent feeders, isn't it possible to let them count the mispicks as well? On our Samsung machines it counts the mispickes, but we don't have intelligent feeders. I could imagine the system of counting mispicks could be connecte
Electronics Forum | Tue Aug 01 09:27:13 EDT 2017 | tmennink
Hi all, We are having a lot of trouble with mis-pick trying to place silicone dome LEDs(3535 package) It seems that the silicone of the LEDs is sticking to the side wall of the carrier tape pocket. The vacuum nozzle would normally suck up the led an
Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL
Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos
Electronics Forum | Fri Nov 17 11:52:41 EST 2000 | Stefan Witte
I've seen problems where the component was slightly thicker than the tape and popped out of the pocket upon transport. Is the component still in the pocket after mispick? Do you have access to a high speed camera or could rent one for a day?
Electronics Forum | Thu Feb 24 20:47:27 EST 2000 | Todd Woods
The camera is important. I found the only machine, granted this was a year ago, capable enough for volume production, was the KME CM-88. Our test had 1 mispicked device of 5,000,000 attemps and 0 misplacements.
Electronics Forum | Thu May 11 14:04:57 EDT 2006 | bobpan
There are a bunch of things you can do to improve component mispicks. Leave an e-mail address and i will send you an e-mail with all the different things i have found to work.
Electronics Forum | Fri Mar 13 05:12:06 EDT 2009 | geb
Hi, Does anyone have problems with the cover tape not peeling back on the 8mm wide feeders. We often find that particularly at the start of the job, the cover tape doesn't peel back causing mis-picks. Thanks, Grant
Electronics Forum | Mon May 03 10:09:40 EDT 2010 | rmalick
get a TX1 error. Part remains in shuttle after getting a feeder mispick. machiune needs to br resert and we have to manually remove part from shuttle any idea how to eliminate this?
Electronics Forum | Tue Sep 17 17:55:36 EDT 2013 | dilogic
Yes, I know all that, but I am interested in some real figures from the field. That is, what percentage of mispicks do you experience on average (for large runs, of course)?
Electronics Forum | Thu May 07 18:30:24 EDT 2015 | comatose
Planned: End of day, Out of parts, Someone forgot to queue up another magazine Unplanned: Part mis-pick, Stencil printer 2d inspection failure, Conveyor or mag handler jammed
