Electronics Forum | Mon Jan 28 08:42:26 EST 2019 | bobpan
mod code 53. make it 2...this speed setting is closer to fast than slow.
Electronics Forum | Fri Feb 01 07:36:08 EST 2019 | dfl
done, mod code 53, "2" is faster than "1". Actually, it looks like the default "0" setting, but somehow it's working a lot better than the "0". Thanks bobpan, I believe this is the one!
Electronics Forum | Wed Jan 30 15:08:10 EST 2019 | dfl
MM, exchange the cards doesn't make any difference. The problem happens when the machine is moving from left to right. Right to left works all the time. bobpan, thanks, I completely missed this one. The default was 0 and now is set to 1. The build c
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o
Electronics Forum | Wed Sep 25 09:59:44 EDT 2013 | bobpan
Hello, This is from my old documents....hope it helps. I would first try mod code 53 = 2 first.....if the machine is a 2C. The motor was known for causing this problem after getting old. These are all resolutions for motor error 4. Step Potential P
Electronics Forum | Mon Mar 16 15:53:17 EST 1998 | Joyce Hughes
| We are sell off all of our thru-hole machines. | Universal Multi Mod 6772 | Universal 6285 VCD | Universal 2596 Sequencer | All machine must go.
Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
Electronics Forum | Tue Oct 28 20:26:53 EDT 2008 | fishingfool
Dominik, Pixel size should not be the main criteria for selecting an AOI. I have a customer that has 2 MVP and they say the solder test are good but part reconigtion is not so good. You also say you need some flexibility on software. I also have
| 1 |
winsouce.jpg)