Electronics Forum | Mon Jan 04 16:55:47 EST 2010 | dyoungquist
We use a HEPCO model 3000-2 (hepcoblue.com) to shorten leads on various through hole components before we solder them on a pcb. You will have to verify they have a die that works with your particular LED module. If they do, this is what I would rec
Electronics Forum | Mon Mar 24 12:15:24 EST 2003 | zaxx007
Hi Kevin, Hepco makes a small unit called a Hepco 3000-2, with the right die set this should be no problem. The unit should retail for around $600.00USD, have a good day. Sincerely, Zack Schmad factory-automation@cox.net
Electronics Forum | Wed Sep 29 11:18:11 EDT 2021 | dontfeedphils
I've always had good experiences with BTU, without fail. I've also had fairly good experiences with Heller, although they do like to slowly die on you one part at a time (blowers, SSRs, etc).
Electronics Forum | Mon May 04 16:17:04 EDT 1998 | VICTOR VELANDIA
WE HAVE : PRESS DANLY 89 P.S.I. TON. 5 STROKE 5 IN DAYLIGHT BED TO SLIDE. 11 IN. DIE SPACE. 19 X 19 MODEL. A 34851. SERIAL 93S - 9575 - 01 YEAR 1996 INCLUDING | TABLE AND P.L.C. PERFECT STABILITY
Electronics Forum | Wed Mar 10 11:24:23 EST 2004 | jdumont
Does anyone have the Falcon vision board that comes in the Contact 3AV? It controls the cameras and monitor. I am pretty sure mine died because the monitor is all garbled. I think it is the same board that comes in all the 3 series models..... Thank
Electronics Forum | Wed Jan 10 14:15:48 EST 2001 | Claude_Couture
We have an old Conceptronic oven (Discovery Mark IV) which we use in the glue process. The video monitor just died. This is a 11 year old oven with a Goldstar model 1420 PLUS monitor. There are no specs in the manual and Conceptronic is not much help
Electronics Forum | Mon Jan 25 00:56:38 EST 2010 | sparrow
Hello, Mydata p&p machines are built for high mixed and low/mid volume production, so if you talk about very low volume - no doubt, mydata is what you can use. You can consider 2 models for your application - MY100SX or MY100LX, depending on the min
Electronics Forum | Tue Apr 12 11:55:06 EDT 2022 | ilavu
We have one JOT magazine loader and PLC died on it. I contacted JOT multiple time to get replacement PLC or backup of PLC and no answer from their support. I have same model of PLC but I dont have PLC program backup. Can anyone here help me who have
Electronics Forum | Fri Jul 23 09:01:36 EDT 1999 | Earl Moon
| HI Earl | Thank you for your answer. | Let me know you about the hot you mentioned | First of all, The rework machine is the BGA3500 (manufactured by 0.k international:U.S.A) | ��DESOLDERING HEAT :OVER 200��(CENTIGRADE),30SEC(CHECKED
Electronics Forum | Tue Sep 23 15:51:46 EDT 2014 | fuji_user_2014
Hi, I'm looking for the best value for storing moisture sensitive SMT parts. Here is the current situation: when the SMT operators leave at the end of the day, they store any moisture sensitive parts that are still in production in a low temp oven ov
