Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Wed Oct 18 08:00:53 EDT 2006 | davef
Have you tested the solderability of the inbound components per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?
Electronics Forum | Mon Jan 15 15:00:11 EST 2001 | pr
It is the distance between board and stencil. When your stenciling solder paste you usually want to contact print (which is "0" snapoff). When you are stenciling adhesive you can affect your dot size and quality by using a gap between board and stenc
Electronics Forum | Mon Aug 11 11:00:40 EDT 2008 | eyalg
RoHS BGA. No lead in it. > RoHS BGA. No lead in it. ok. this is not the case .It was sn/pb type...
Electronics Forum | Mon Aug 13 10:00:18 EDT 2007 | ed_faranda
Might want to check to see if the weight of your part has increased. If it has increased, you may not have enough surface tension to hold the part on the board. I am assuming you already checked that the component isn't getting hit by something in
Electronics Forum | Fri May 23 00:16:31 EDT 2014 | edriansyah
Hello all. I need you advice and opinion on my problem with BGA drop off from the boards. Initial defect was ICT fail, but due to some accident, the board fell off, and the BGA just pop out. After some search, I end up to conclude it is a black pad
Electronics Forum | Wed Apr 12 21:04:10 EDT 2000 | Dave F
Ashok: You still didn�t tell me why you want additional drying of your boards, but what the hey, we all have our dark secrets. Anywho, let�s consider some options for reducing the moisture of your cleaned boards: OPTION 1 - Up-Grading Your Cleaner
Electronics Forum | Wed Oct 25 06:47:06 EDT 2017 | lm_tech
I have an Asys TRM-02 that is displaying an error code on it and was wondering if someone had a list of codes for this model of machine. It is displaying "Modul 00 Off"
Electronics Forum | Thu May 13 23:01:07 EDT 2004 | fastek
Unplug the tactile sensor and check the switch with an ohm meter. If the tactile sensor switch is good go in one of the drawers in the back of the machine and with the help of your schematics find the opto-module that controls the tactile sensor circ
Electronics Forum | Thu Sep 15 12:28:00 EDT 2016 | cyber_wolf
Like maybe the two supply lines to the module are flip flopped. Ive seen this cause issues.
