Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Fri Jan 12 13:56:59 EST 2001 | adrian
What is squegee snap off and how is it measured?
Electronics Forum | Fri Jan 12 16:29:22 EST 2001 | blnorman
Snap off is the distance from the top of the board to the bottom of the stencil.
Electronics Forum | Sun Jan 28 21:50:22 EST 2001 | Dreamsniper
Hi Adrian, If you do a "squeegee snap off" during solder paste printing...the result would be a very thick solder paste deposition. I think the correct term is stencil snap off or people say it "snap off distance". =)
Electronics Forum | Wed Nov 20 01:38:53 EST 2019 | ajspec
Hi, i'm facing solder mask peel off but limited to the solder defined pad only(opening area). no peel off on the other area and it happened on electroless nickel immersion gold finishing only. for other finishing is not affected. kindly advise if you
Electronics Forum | Fri Jan 12 17:24:02 EST 2001 | darby
SQUEEGEE snap off is the gap between the top of the stencil and the the bottom of the squeegee blades. You can measure it with a set of feeler gauges.
Electronics Forum | Mon Jan 15 08:24:32 EST 2001 | adrian
I thought the stencil was flush to the top of the board when Screen printing. When does this snap off occur in the screen printing process?
Electronics Forum | Tue Jan 22 07:34:07 EST 2002 | cabjerk
Hi All; We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck. Any leads out there? Thanks Carl B.
Electronics Forum | Tue Jan 22 20:30:44 EST 2002 | davef
Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)
