Electronics Forum | Wed Dec 07 11:12:17 EST 2011 | thanh
go to Components Info. F4 to Pick & Mount Info scrool down to Mount Action change to Normal instead of Fine.
Electronics Forum | Thu Dec 08 01:17:35 EST 2011 | mk15
Hi, I look Pick & Mount and Mount action was NORMAL - OK. When the head pick component then stop outside lamp housing (fixed camera - recognition camera) and then discard component. It repeat 3x, and Error E2. When I do adjust assistant for componen
Electronics Forum | Tue Sep 09 20:32:10 EDT 2003 | davef
The maximum ratio of gold weight to solder alloy weight can be calculated, to help prevent a problem from excessive gold-tin intermetallic compound (i.e., AuSn4). For the equation and its derivation, please refer to "The Use of Capillary Action Measu
Electronics Forum | Mon Feb 19 18:57:49 EST 2001 | davef
Expanding on the limit of the portion of gold acceptable in a solder connection [mentioned in an earlier post]: The embrittlement culprit, AuSn4, is 29 weight percent gold. So even if one had 100% tin as the solder alloy and 10% gold were dissolved
Electronics Forum | Wed Aug 03 20:28:10 EDT 2022 | cbeneat
We have been known to bring the break air to, and past .1 on the gauge. You have to be careful, as you increase the break air It can blow small parts that are close to any light, or send a part that it is trying to mount. So we always increase increm
Electronics Forum | Tue Aug 27 12:56:45 EDT 2019 | surfacemountprocess
It really depends on the assemblies/components that need to be inspected and the available budget. 3D machines are much more reliable at detecting faults while not generating masses of false calls but of course they cost more than 2D machines. I ha
Electronics Forum | Thu Jun 24 19:14:44 EDT 1999 | Mike Konrad
Very good questions Bob� Given the fact that my company is a manufacturer of batch cleaning equipment, I will speak more in general terms rather than in specific terms. There are several criteria used in the evaluation of batch aqueous cleaning sys
Electronics Forum | Wed May 27 14:29:25 EDT 2009 | jax
Universal use to sell a a device, machine mountable, that could place this connector. I am not sure if they still sell it... It has been 3-4 years since I saw it in action. The upgrade would force the boards stops to remain in the Up position while
Electronics Forum | Sat May 14 00:10:30 EDT 2022 | cbeneat
Alex, I can tell you from experience it took a great deal of experimenting with settings when we first started running these. Our best course of action if the settings aren't making a difference, is the blow off. I've had it, let's say pretty high as
Electronics Forum | Tue Jun 11 14:58:45 EDT 2002 | Chris Lampron
Hello Sean, We are currently using a Pin in Paste process to mount some through hole relays. This particular board has 72 relays per. We have cut the stencil to overprint the hole. By putting a small amount of solder in the hole to flux the lead, th
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682