Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
Electronics Forum | Wed Mar 15 11:27:05 EST 2006 | stepheniii
By any chance is it eutectic paste and pallidium leads? Also how tight are you checking coplanarity? At least with the MPA-G3 you can check so tight that any IC will fail in the real world. Or you can check so loose that you might as well not check.
Electronics Forum | Mon May 03 17:14:36 EDT 2010 | stepheniii
If I remember correctly the best solution was to turn the shuttle off. I don't think we ever found any real benefit to using the shuttle. On some machines a shuttle is great but IRCC not so much on this one. Do some time trials to see if using the sh
Electronics Forum | Thu Jun 06 08:16:13 EDT 2002 | caldon
Jim- Sorry I can not offer advice on the Panasonic machine but do want to shed light on the Die and waffle pack issue. Take note that if the Die are loose in the pockets the balls or terminations could be damaged. The thin layer that the ball is atta
Electronics Forum | Tue Sep 17 17:39:26 EDT 2002 | fastek
Stephen- I'm not sure since I'm having trouble understanding your post whether you are knocking my post or not. If you did intend some sort of slight than let me clarify your concerns: 1) Claude is not using an MPA-G3 so H.D. is out. 2) I've used P
Electronics Forum | Mon Feb 25 18:10:13 EST 2002 | stepheno
When you say "dropping" I assume you mean "rejecting" them because co-planarity is outside the tolerance you have set and the machine is putting them on the reject belt or tray as the case may be. I worked for a CM with an MPA-G3. One customer suppl
Electronics Forum | Tue Sep 17 12:38:17 EDT 2002 | stepheno
If you have a newer style MPA like the MPA-G3, check out http://www.hoverdavis.com/Products/mpp/mpp.htm I find them much better than the panasonic feeders. You may have to set pitch to 2 or 3 because of timeing issues, or you can change the NC progr
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
| 1 |
winsouce.jpg)
