Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Fri Jan 04 10:39:37 EST 2013 | dontfeedphils
We've got used MPM Accuflex that we recently purchased and it seems like the stencil to board offsets need to be calibrated. After looking into the manual it looks like it requires a fixture or calibration jig, can anyone confirm this? Does anyone
Electronics Forum | Wed Jan 22 08:59:40 EST 2020 | borisanic
I need to calibrate vision offset of MPM Accuflex printer. According to manual I need the calibration stencil with 49x49 holes. Does anybody know what is the approximately diameter of those holes and what is the distance between rows and columns?
Electronics Forum | Tue Mar 25 08:35:49 EST 2003 | pjc
AccuFlex is the replacement for UltraPrint 1500. UP1500 is going obsolete. AccuFlex was desgigned for fast setup and changeovers and takes some tasks away from the operator. The UltraPrint 2000 was designed for high production, even though many users
Electronics Forum | Mon May 09 21:07:53 EDT 2022 | kurtiss
Currently we have a line running a MPM Accuflex. We are working on setting up a second production line and are in need of a new stencil printer. The two machines available within budget are a MPM Momentum and a Ekra X6. We have been happy with the MP
Electronics Forum | Thu Aug 13 14:52:42 EDT 2015 | deanott
We just encountered a problem with the vision on our MPM Accuflex. We just switched jobs and when we went through a 'Vision Set-up' there was no image (just blank gray screen where you'd normally see the PCB or bottom of stencil). When we tried to
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and
Electronics Forum | Mon Apr 01 20:40:49 EDT 2013 | aemery
Quite sure it is one of the follow things. Squeegees are not tall enough (using after market blades); Are you using a stencil adapter? bottom surface of the stencil must be even with the top of the stencil shelves; printhead assy. is modified, faile
Electronics Forum | Thu Jan 23 08:31:44 EST 2020 | dontfeedphils
I've had to order the PCB and stencil from aftermarket sources in the past, but I can't find the info anywhere on the stencil/hole grid. All I have is this manual. I believe I actually rented the PCB/stencil from PPM, then ordered my own replacemen
Electronics Forum | Sat Jan 12 15:37:33 EST 2013 | mwac
If the machine is printing with an offset on all products, then yes the printer needs to be calibrated with the fixture. That particular model requires the same tools as the 500 and 1500. They were different from other MPM machines of that or prior
