Electronics Forum | Thu Jul 27 22:27:45 EDT 2006 | seth
Vision X-Y maintenance procedure, please advise. I have problem with camera not park so often time, and I don't have any solution accept buying a new vision Y right stepper motor, but that's just too much money roughly 2500 dollars.
Electronics Forum | Tue Sep 26 08:42:29 EDT 2023 | carl_p
If your using Fids & not a board feature I would push it back to the board fab house & get them to cover costs. Give the board fab house a drawing of the board with acceptable tolerances etc. Never had had to use an offset with this method.
Electronics Forum | Fri Jul 15 14:04:35 EDT 2005 | valuems
Hi I thought that I was the only one that thought that was confussing. Have almost never had any one mention this one. When I was a field engineer for mpm, people would say something about every thing being backwards and then they would just accep
Electronics Forum | Sat Feb 10 10:08:04 EST 2018 | griinder
We recently acquired used MPM Accuflex. Immediately I noticed the live vision is mirrored. This makes it incredibly difficult to teach fiducials. I noticed some smudges on the lens, which leads me to believe the camera assembly was "worked on" at som
Electronics Forum | Mon Sep 28 08:08:30 EDT 1998 | Jimmy strain
| Does anyone out there have any pictures (jpeg preferred) of solder paste prints - or know where some are available. It will be awhile before our 35mm camera for our 3D scope arrives and I need some for inspection criteria. I need the good, bad, and
Electronics Forum | Wed Jun 02 07:23:04 EDT 1999 | Earl Moon
To you all for comment and summary, The following things I like without endorsing (PCB/PCBA stuff - outside the great women in my life [many] and without [mostly]): 1) A good set of design rules 2) A good set of design rules meeting producibility r
Electronics Forum | Wed Jun 02 23:53:09 EDT 1999 | Dean
| To you all for comment and summary, | | The following things I like without endorsing (PCB/PCBA stuff - outside the great women in my life [many] and without [mostly]): | | 1) A good set of design rules | 2) A good set of design rules meeting pro
Electronics Forum | Tue Jan 12 19:07:07 EST 1999 | Earl Moon
| | For process management with SPC of the stencil printing process with a fully automatic stencil printer, what process outpur parameter would you recommend for SPC? | | | | It appears to me that there are two options: | | A: to have a pn chart bas
Electronics Forum | Mon Jan 12 18:40:32 EST 2004 | fastek
You don't want dedicated tooling. Make sure your machine comes with front and rear dams and plenty of side chucks and magnetic support pins. The best option for these machines is the side snugger option but it doesn't sound like your machine has that
Electronics Forum | Mon Sep 25 09:18:38 EDT 2006 | daxman
Thanks for the posts guys, I'd like to mention a few things... In my opinion, the tooling does not get any better than this. The board is fairly small and quite stiff. There is no board warping. The tooling plates are tight and the vacuum really h
