Electronics Forum | Tue Sep 26 23:16:21 EDT 2006 | KEN
powder coating. Hmmmmm.....racing red, performance blue. Dude I'm on board! Also, (if possible) I wold like to see paint schemes like NASCAR. M&M, Home Depot, Lowes....can ya' feel the vibe? (Hey, let's not get crazy about the Cognex system -my s
Electronics Forum | Fri Jul 15 13:56:18 EDT 2005 | chunks
Here's an easy one. Make a camera that looks up at the board a non-mirror image. You could keep the mirror image toward the stencil since stencils rarely have any legend on em.
Electronics Forum | Fri Jul 15 09:28:25 EDT 2005 | valuems
This is one item that has had us confussed for a long time. Your right the only advantage is speed, our question has always been why buy a expensive machine if you don't need it? Have never received a good answer. What we do hear is "we seen it a
Electronics Forum | Thu Jun 17 21:24:32 EDT 1999 | Dean
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Mon Feb 20 15:28:15 EST 2017 | fuzz
Hi guys. I'm dealing with 3 MPM Ultraprint 3000 machines in our plant that were showing different issues. I managed to solve most of them but one is killing me and I can't seem to solve it. It's a 3000 HiE model... Basically, the machine seems to be
Electronics Forum | Wed Jun 18 12:23:03 EDT 2008 | mrmaint
Could it be that the board that the trackball plugs into is bad?
Electronics Forum | Tue Jul 15 17:28:10 EDT 2008 | proy
We have an SPM which has a faulty touch screen (worn out?? who knows). ELOtouch does not have a replacment for this old screen. Has anyone here had any luck replacing it with something else, OR replacing the computer with another, upgrading the soft
Electronics Forum | Thu Jul 17 17:20:39 EDT 2008 | steveliu
The screen we had is a Planar EL7768MS. There is a small DC/DC power supply board attahced to the back of the touch screen. That PS board was toasted and caused the failure of the screen. Steve
Electronics Forum | Thu May 24 09:13:05 EDT 2018 | dleeper
Mine did the same thing, I wasn't really sure what that switch was for. I never cared enough to worry about it since the boards always required some fine adjustment before printing.
Electronics Forum | Fri Feb 06 15:52:18 EST 2004 | pjc
SPM is superior in terms of technology and application. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the MicroFlex. MicroFlex is microprocessor controlled while the SPM has a PC. SPM can print down to 12mil (0.3mm) fine pitch no
