Electronics Forum | Sun Nov 27 16:53:39 EST 2016 | ttheis
Our UP500 has been running great for a few months then the AC/DC 5/12/24V power supply stopped working and the PC could not communicate with the cage. The PC screen also got very noisy. We replaced the power supply with a used replacement and the ma
Electronics Forum | Sun Nov 22 17:52:49 EST 2015 | wesleyintelli
Hi Deni, Thanks for your interest in my problem. It turned out that the power supply to the VGA vision board (the system in the black box)was faulty. I replaced it with a universal PC power supply and all is well.
Electronics Forum | Tue Aug 08 16:49:41 EDT 2006 | darren
Chris Call Heller and get a new hard drive, then reload your software and start loading your recipes from your back up. That clicking noise, is it coming from inside the computer or the machine itself? Have you checked the power supply for the in th
Electronics Forum | Mon Sep 28 12:52:56 EDT 2009 | markhoch
I'm not familiar with this particular MPM model, but in my experience, most MPM's are Computer Controlled. There should be a CPU embedded somewhere within the machine. Check to see if it's getting power. (I'm assuming you're already checked fuses/cir
Electronics Forum | Fri Aug 03 14:55:26 EDT 2012 | davef
Not the best situation in the world, but you know that. Check with printer equipment suppliers [eg, DEK, MPM, etc] for a product called "Stencil Clean Wipes." Back in the old days, we'd: * Wipe the stencil with a solvent soaked wipe * Put the sten
Electronics Forum | Tue Sep 21 18:46:24 EDT 2010 | slwolbert
Greetings: > > I am having 'Check Servo' issues > with an FCP 2 4000. It will zero set but given a > few minutes afterwards, the check servo alarm > sounds. > > At times the X/Y table will 'coast' > back to beginning position, like the power
Electronics Forum | Mon Sep 03 21:33:41 EDT 2018 | aemery
Jeff R, The "24VS" stands for 24VDC Voltage Switched; meaning that it is supplied under machine control and other things have to happen in the machine before 24VS is applied, in this case to KP1 coil. KP1 coil/contact is in place as part of the pow
Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
Electronics Forum | Tue Nov 01 14:46:31 EDT 2011 | davef
Agilent TestJet Technology White Paper In the early 1990s, the testing of digital parts became problematical. Previous in-circuit test techniques sought to ensure a correct, functioning part by applying digital patterns, called vectors, to the input
Electronics Forum | Tue Nov 06 10:28:58 EST 2018 | davef
Media Links IPC Global Insight This weekly electronic newsletter includes IPC news and multimedia information on manufacturing and management best practices and solutions, new technologies, standards, government relations and environment, health and
.gif)
