Electronics Forum | Wed Sep 26 11:42:19 EDT 2012 | comatose
I have an ap-25 and wish i had gotten the UP-2000 instead. How's that for an answer? The main difference is that the ap-25 uses linear motors and air bearings, whereas the up-2000 uses ball screws. The linear motors are faster, but the whole thing i
Electronics Forum | Thu Jun 22 03:27:08 EDT 2006 | dman97
Hi everyone, I was wondering if anyone knew of a backdoor setting in these machines that will allow you to change the machine configuration. At my company, we have one operator who decided it would be nice to lock everyone out of the user menus. He
Electronics Forum | Thu Mar 30 10:02:03 EDT 2017 | Bestglobal SMT
We have a 2008 DEK horizon 03i this machine has been a very reliable system. we are having an issue with the print being offset in the x .2mm I have run 4 different boards - same issue on all. same offset. i can print the board 10 times over and
Electronics Forum | Thu Mar 30 10:54:48 EDT 2017 | emeto
If you use the calibration plate and stencil, that should fix the problem. I think that you are not saving the result from the calibration test. Double check manuals and probably with DEK technician, but it sounds like you are missing a step.
Electronics Forum | Mon Jan 28 16:48:14 EST 2002 | djarvis
Printing with adhesives is no big deal so don't let the sales types try to mystify the process and convince you that they have the only stencils/adhesives/knowledge that can possibly get you through this "trying time" - at a price. Start with 0.010"
Electronics Forum | Fri Mar 09 15:13:49 EST 2012 | davef
Care must be taken to not apply an excess of material, as the adhesive will flow under the device during placement and curing, and could cause a short. Printer setup: * Don't worry about stencil thickness. A wide range of stencil thicknesses (typic
Electronics Forum | Fri Feb 14 08:30:33 EST 2003 | pjc
I sent you some adhesive printing application data from MPM and Epibond for review. There's good stuff in docs. Run the ppt file as a Show to get the animation.
Electronics Forum | Fri Feb 14 09:30:00 EST 2003 | blnorman
We currently use Epibond 7275 with MPM printers. Unfortunately we've had problems with Vantico (formerly Ciba) providing a consistent product. Last summer we had extreme difficulty printing due to excessively high adhesive viscosity (20% higher tha
Electronics Forum | Wed Dec 17 13:34:15 EST 2008 | jorge_quijano
Ok, thanks for the info, fortunatelly we already have our Camalot glue dispenser machine In-line with our MPM, for helping whit the high stand-off components.
Electronics Forum | Mon Apr 24 09:43:47 EDT 2006 | printerman
What you describe is the X snuggers fitted into the workholder which do need either a flat board or good vacuum to work. There are several solutions. One solution you can try yourself is to use Vacuum cups, ( bellows type) designed into the workholde
