Electronics Forum | Fri Jun 12 14:19:03 EDT 2015 | tdemon69
i have a up 3000 ultraflex. the lower half of the tactile sensor is stuck down. i have replaced the driver board, check wire down to drive board,check the fuse for power on the driver board.
Electronics Forum | Sat Jun 13 13:51:44 EDT 2015 | tnisbet
The problem could be the tactile motor, we have it in stock. Please contact sales@goppm.com and request a quote for part number CA-399.
Electronics Forum | Thu Jul 02 17:06:39 EDT 2015 | aemery
Just to clarify, you are talking about the inner black box not driving down and not the pneumatic function that brings the tactile assembly closer to the stencil? Sometimes the pneumatic shafts get slightly bent and the assembly will not retract. T
Electronics Forum | Mon Apr 18 12:52:41 EDT 2005 | paulhaines2000
Try this - it's for a UP3000 but might work for you... Operator � no password Supervisor � mpm2 Maintenance � mpm3 Manufacturing � mpm4 Field Service � mpm4 1. To change or view codes, �esc� from program and go into DOS. 2. Type �cd\ULTRA\CONFIG�
Electronics Forum | Thu Apr 06 18:31:27 EDT 2006 | jsloot
Any one familiar with a board clamp problem on MPM UP3000? The one I have will not clamp the board when program is running. It will work when toggled through the output diagnostics. Any help is appreciated.
Electronics Forum | Sat Apr 09 18:33:08 EDT 2005 | valuems
Hello If mr. Miller will go to the dos promp ( esc key ) and type in dir/w and then open the .000 file he will find the pass words. As far as the UP100 goes, god only knows. Forget finding this in the manuals. And I should add the .000 file is a su
Electronics Forum | Sat Apr 09 13:42:03 EDT 2005 | jh0n!
how funny... we just bought a up1500, no manuals/install cd, and we need to do the same thing. i was hoping that by removing /sigpro/user.pwl and /sigpro/permis.lst, and all references to them in sigpro.ini and sig1500.ini it'd let me in, but no luc
Electronics Forum | Sat Apr 09 23:14:36 EDT 2005 | MikeaJ
In response to the post concerning the UP1500, the case is a little different. The Speedline/SMTech passwords are hardcoded into the Sigpro.exe file. Here is what you need to know: Login name: Speedline (or SMTech) Passwords are listed in order of ri
Electronics Forum | Sun Feb 13 20:12:53 EST 2000 | K. S. PARK
Hello . i am reviewing the s/p dek (dek 265 infinite) ,mpm (up3000). all user say the machines are good. but to me rheopump versus proflow. which one is better. someone out there using these head advise me. bad or good thing whatever it is
Electronics Forum | Thu Jun 22 10:22:28 EDT 2006 | PWH
I've done this stuff on UP3000's and AP's so hopefully my advice will help with your 2000... You can get into all upper level user modes, correct? You don't mention test, cal. or field service mode. If you can't get into those, I can send you a pr
.jpg)
