Electronics Forum | Thu Jul 12 11:56:20 EDT 2012 | hegemon
You might try to complete all your soldering within a 72 hour or less time frame. For all intents treat your board like a moisture sensitive component after you have baked and completed SMT reflow. Wash, blow dry, and go direct to stuffing and com
Electronics Forum | Wed Nov 29 01:46:10 EST 2006 | hanocete
Hi! to all, Here in our company, we sometimes received BGAs and ICs that were packed poorly(not sealed), and no MSL level written to it from our suppliers, now we subject the material for baking before using it. We use J-STD-033B table 4-1 as our cr
Electronics Forum | Wed Jan 17 11:30:23 EST 2007 | Colleen Miller
We have some larger MSL3 parts that require baking. they are 6mm thick which takes them off the chart provided at http://www.jedec.org/download/search/jstd033a.pdf Does anyone have a reference that would tell me the baking times for these component
Electronics Forum | Wed Sep 17 08:51:10 EDT 2008 | 18424
We have seen this same defect. Led's not blinking during test and some tops popping off. Ended up being an msd problem. most of the lite-on components are msl level 4-6. We now bake and track them no problems seen in a while.
Electronics Forum | Tue Aug 14 15:45:06 EDT 2001 | davef
BOARD BAKING SCHEDULE: Bake time depends on the board thickness and construction. For laminated FR4 PCB, we bake between 6 and 24 hours at 100�C. ROOT CAUSE OF THE PROBLEM: Heating moisture entrapped between the laminations of the board too quickl
Electronics Forum | Thu Jun 11 22:57:45 EDT 2009 | davef
NASA recommends baking a PCB for a minimum of 4 hours at 93+/- 5.5�C before conformally coating. [NASA-STD-8739.1, �Workmanship Standard for Staking and Conformal Coating of Printed Wiring Boards and Electronic Assemblies,� August 6, 1999]
Electronics Forum | Fri Jul 30 17:16:59 EDT 1999 | Dave F
| Hello Netters, | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on e
Electronics Forum | Fri Jul 30 17:24:24 EDT 1999 | Dave F
| | Hello Netters, | | | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinne
Electronics Forum | Mon Jan 30 16:30:55 EST 2006 | GS
Hi James, it could be the problem is due to residual of cleaner media entrapped under low gap of QFP 208 and 0,5 mm lead pitch. I remember in the past we had random problems of failure at test after board wash off process (DI Water wash). We met
Electronics Forum | Thu Jan 17 20:33:05 EST 2002 | ianchan
Hi, Can anyone help explain the benefits/disadvantages of bareboard pcb baking, as part of the pre-heat conditioning, before the bareboard pcb use in SMT production run? The pcb board is 200mm x 240mm panelized pcb board, and has 28 smaller pcb boa
