Electronics Forum | Wed Jul 06 09:51:23 EDT 2005 | Jack
Doug, It always seems easier to fix one or two problems by eye at the time. The real problem comes when the customer wants the same board run again later. You're okay if you saved the corrected placement routine, but if you end up moving the job t
Electronics Forum | Sun Aug 14 22:58:17 EDT 2005 | crishan
Hi All, I would like help in establishing what is a feasible PPM reject rate from a typical SMD line. As a reference an SMD line consists of, solder paste printer, chip component placement, pick and place IC components and reflow. What is a bench
Electronics Forum | Mon Aug 17 15:59:48 EDT 2020 | cyber_wolf
Calibration was done improperly or you have a bent mount tool.
Electronics Forum | Fri Nov 20 09:32:35 EST 2020 | artem
Hello, I have fixed the issues with the centering. Below the centering head there is a adjustment screw. First you have to remote a few screws to get access to it. They you can turn the adjustment screw to align the centering jaws.
Electronics Forum | Mon Aug 17 11:35:57 EDT 2020 | artem
Hello, I have some troubles with my MyData TP11-UFP with the precision of the placement. All the parts which are mechanically centered are slightly misaligned. Attached are some pictures of 0603 and a SOT23 part. I have made the calibration but it
Electronics Forum | Wed Jan 26 21:23:51 EST 2000 | Dennis
Hello! all Will anybody give me advice for missing componets for 0402, 0603 R or C chips? I am not gonna tell you which machine I use, but from my experience, every p&p machine has possibility for missing component after placing 400 or more componen
Electronics Forum | Fri Jun 30 20:59:04 EDT 2006 | johnwnz
Folks, who uses MYData's?.... In a previous life I was a fuji man and liked them I have to say, they were big n heavy and you could drop them from a plan and they would still work... well till they brought out the QP's but lets not go there. I did ha
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Mon Jan 11 11:00:48 EST 2010 | ptxems
We have recently upgraded our placement machine to a Juki KE760. We also have 2 Zevatech PM570L's. All our placement data is on individual floppy disks, they were generated using the 570 machines. Having put the disks into the 760 it does not recog
Electronics Forum | Mon Jan 18 11:49:30 EST 2010 | tech1
Yes it can, I think
.gif)
