Electronics Forum | Mon Apr 08 18:16:20 EDT 2024 | mistrthou
We had a Mycronic tech in adjusting rings to get us within spec. He was saying the emitter/receiver board at the top and the tubes themselves can go bad. Between that and having weak latches, we're looking at a refurbished unit. But we're rocking a M
Electronics Forum | Wed May 08 10:40:48 EDT 2013 | huske
We have had this problem before, and Phil was pretty close. On the hydra where the vacuum tubes are connected to the tools shafts you should see a red light inside there. this light locates a lazer cut mark on each of the tool shafts, this lets t
Electronics Forum | Fri Jan 05 16:16:51 EST 2024 | mistrthou
Based on the my15 we used to have and our current My100's I'd say it lost the position of the tool bank. Is it Hydra or Midas tooling? Uninstalling and reinstalling the hydra tool bank is fairly easy. If it's Midas tools, does it fetch other tools
Electronics Forum | Fri May 31 10:35:46 EDT 2002 | dason_c
I think that the IPC spec only apply to the MSD. I had a paper from Lucent and forwarded by Francois Monette, please aware that the first 2 hours, the moisture doesn't bake out from the assembly/component and result show that it is increase the weigh
Electronics Forum | Wed May 27 16:39:33 EDT 2009 | rmitchell
Hi, I think vision 20 will work as well. If not we have used 100 or 105. Have you tried placing the part with the machine trace on? If so is it finding all the leads? any error codes? If you are defining the leads in the EL lead data I would not d
Electronics Forum | Sun Sep 19 03:29:55 EDT 1999 | Brian
| | | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | | | ...or 10 mil? | | | | | | | | | | | 1 mil= .001 inches | | | 10 mil= .010 inches | | | Also, it has nothing to do with metric. | | | | | | I was also
Electronics Forum | Sun Sep 19 03:38:43 EDT 1999 | Brian
| | | | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | | | | | ...or 10 mil? | | | | | | | | | | | | | | 1 mil= .001 inches | | | | 10 mil= .010 inches | | | | Also, it has nothing to do with metric. | | | |
Electronics Forum | Sat Sep 25 08:00:11 EDT 1999 | Brian
| | | | | | | I am attemping to gather as much information on the issues with and progress in solutions for manufacturing Pb free products in response to European initiatives (WEEE). I am intereested in component issues with As Made lead termination
Electronics Forum | Sat Sep 25 11:05:08 EDT 1999 | Earl Moon
| | | | | | | | I am attemping to gather as much information on the issues with and progress in solutions for manufacturing Pb free products in response to European initiatives (WEEE). I am intereested in component issues with As Made lead terminati
Electronics Forum | Sun Sep 19 06:15:41 EDT 1999 | Earl Moon
| | | | | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | | | | | | | ...or 10 mil? | | | | | | | | | | | | | | | | | 1 mil= .001 inches | | | | | 10 mil= .010 inches | | | | | Also, it has nothing to do with m
