Electronics Forum | Fri May 30 09:50:04 EDT 2008 | jdengler
Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry
Electronics Forum | Fri May 30 09:53:19 EDT 2008 | cyber_wolf
"Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry " Thats what I meant when I said they
Electronics Forum | Mon Feb 17 02:51:21 EST 2003 | Scott B
We have also had this problem. I have managed to get around this by selecting a teach video model and positioning the teach window to include half the pad on the left and half the pad on the right so that the center point is bang in the middle of the
Electronics Forum | Tue Apr 27 14:54:26 EDT 2004 | Kirk
reduction apertures in stencil and question how find center?. I thought that vision start playing important role at the beginning for the first PCB, help set precisely printing process. You gave tip to work without Mylar. Ok but again how you set ste
Electronics Forum | Fri Mar 26 21:48:56 EDT 2010 | dman97
Can someone explain to me what I'm supposed to do after I have done the vision offset calibration procedure? The manual tells me to put solder paste down on all 25 holes of the stencil. After this the board drops down and the machine scans each fidu
Electronics Forum | Mon Jul 28 19:03:53 EDT 2003 | Ryan Liao
Hi mantis, Thank you for your helps. I had checked the CP7 error code index application. It also gives me the same answer. It tell me " the part pickup status is bad" and I have to "Make sure that the nozzle is not bent and that the part is being pro
Electronics Forum | Wed Nov 09 11:01:41 EST 2005 | DannyJ
Hi Red and Greg, First, to Avalancher, the service that is mentioned is fantastic. I have used it various times with various connectors and headers with fantastic results. Just contact MyData and they'll tell you what they need. It's usually 5-1
Electronics Forum | Tue Nov 08 15:44:35 EST 2005 | Red
I just received a reel of RoHS parts but I have a rejection rate of 15% since I started using it.Does anyone has experience this so far? My machine Mydata My12 with TPsys 2.2.5e
Electronics Forum | Wed Nov 09 07:53:08 EST 2005 | avalancher
In TPSys 2.2, you do not have the Auto Teach function that Grant was talking about. The thing to do at this point is to include a MYDATA person. They have services which offer you to send your problematic part in and they will analyze it and tell you
Electronics Forum | Wed Nov 09 08:39:59 EST 2005 | smtspecialist
Thanks Avalancher. I had no clue about the fact that Mydata could analyze part for me. Since I'm in montreal it's hard and expensive to get a Mydata guy up here but sending the parts down there would be an great inexpensive solution. I've been over t
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
