Electronics Forum | Sat Apr 02 16:07:39 EST 2005 | jsk
two bent pins on the connector...replaced..works like a champ Thanks all for the help
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
Electronics Forum | Thu Mar 10 15:13:31 EST 2005 | pmd
I agree with SirTec. Conflicts with other magazines slotted into machine often cause un reckognized magazine errors elseware. You can also try to re seat the first pair of MOT driver cards in computer this is whare mag data is stored. Also a loose ca
Electronics Forum | Mon Mar 07 09:44:49 EST 2005 | anonomous
The machine sees a magazine, but with wrong number. somehow one (maybe more) wire from the magazine bus does not reach slot 3, as the other slots work, there is probably not a short, as the magazine bus work for other slots, the problem is probably i
Electronics Forum | Mon Mar 07 11:19:13 EST 2005 | cyber_wolf
Another thing : Make sure that there are no other mags plugged into the machine while you are trying to trouble shoot slot 3. I have seen shorted vibratory ID chips mess up other magazines up in different slots. For instance : a shorted vibe in slo
Electronics Forum | Fri Apr 01 01:26:17 EST 2005 | Marv
A couple of things.. 1) The problem is more than likely on the magazine board itself (TC2), most likely the pal chip that stores the serial number and feeder information (you could swap this with a working magazine to verify) 2) The magazine connecto
Electronics Forum | Thu Mar 10 10:35:39 EST 2022 | paddymanoj
I have a used MYDATA Pick & Place Machine. It is MY9 and year 2000 Model (almost 22 years old). I have 5 extra magazines of this Machine (MY9). I want to know, if I can use these Magazines with any other latest MYDATA model. If someone can tell me, w
Electronics Forum | Mon Oct 24 01:47:36 EDT 2005 | hcl
We are considering MY-9 AND YAMAHA YV 100XG. WHETHER YV100XG CAN PLACE O201 AND 01005? WHAT IS THE CAPABILITIES OF PLACEING BGA/CSP ETC.,
Electronics Forum | Wed May 26 12:20:38 EDT 2010 | emrtech
we are currently running 0201 components using the c-14 tool on the my9 pick and place and are having a lot of missing components with in the PCB's. is anyone or has anyone had this problem? if so, were you able to finf a fix for it?
Electronics Forum | Wed May 26 12:52:52 EDT 2010 | emrtech
Found a company that builds modified tool tips for my9 with stainless steel tip. we are going to try one and seen if it helps on placing the 0201 components. the rubber tip just gets damaged too easy and components stick to it do the solder flux.
