Electronics Forum | Thu Apr 09 20:18:31 EDT 2020 | jlawson
Can not speak for CircuitCam is made by Aegis Software I veliveve sound like need to get understanding of how tool is supposed to work to extract-create centroid positions. Using Gerber Only is a pattern match and cacluate logic process - ie make pac
Electronics Forum | Fri Apr 10 20:04:00 EDT 2020 | jlawson
> Fabrication Format. With good tools Like Valor MSS PP you can handle the old (legacy flows) and of course better more modern flows all from one learning library solution = more effective first time right outputs
Electronics Forum | Thu Mar 26 13:31:37 EDT 2020 | rgduval
As everyone else said, if you don't have CAD, it's a pain to digitize the gerbers. So much so that we only did it once when I went to CircuitCam training. After you digitize the gerbers, you have to merge the BOM with it. And you have to tell it p
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Wed Jun 09 23:58:59 EDT 2021 | SMTA-64387687
The electrical test, on those older machines, wasn't very exact. Try to expand the tolerances, 25-30% for caps and 10% for resistors, and see if that solves your problem. Also, if I remember correctly, if you go into the layout and single-place the c
Electronics Forum | Wed Mar 25 14:46:08 EDT 2020 | stephendo
What about designators? Using gerbers to program a pnp machine was always a last resort to be done only after much complaining and begging for proper CAD data. Back in the day I used UniCAM to program a mydata. After getting it figured out it was eas
Electronics Forum | Tue Mar 24 23:44:17 EDT 2020 | kghadiya
I am having trouble programming circuitcam for mydata (my9) pnp machine. My question is, when i digitalize the gerber file what should i take care to get required output for my9? In my9 i cant see exact positions of all the components. I have assign
Electronics Forum | Wed Apr 15 18:37:15 EDT 2020 | unisoft
The point here is if you can't get the full CAD files or the XY rotation files and all you get his Gerbers and a BOM. Most all contract manufacturers and some OEM's at some time or another have to deal with Gerber only files. If you find yourself i
Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice
> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett
Electronics Forum | Fri Apr 10 09:59:13 EDT 2020 | spoiltforchoice
> We unfortunately use GERBER data to digitize <BR> > boards more than any CAD. We are CM and many of <BR> > our customers do not provide CAD. With some <BR> > Legacy products, we still use 274-D Gerbers
winsouce.jpg)