Electronics Forum | Fri Apr 10 10:31:47 EDT 2020 | proceng1
Certain customers do give us CAD. USUALLY ODB++ but I've also gotten .ipc and .pcb . Many of our customers bought or inherited a design, and therefore have no control to generate additional files. Or, as you mentioned, they had another manufacture
Electronics Forum | Mon Oct 15 08:24:24 EDT 2012 | scottp
You could pay the extra to have the microvias plated shut and planarized. If your voids are larger than 25% of the BGA joint area then I would suspect a solderability problem. Either the board plating or a solder paste problem. If they're less tha
Electronics Forum | Tue Aug 09 09:41:32 EDT 2011 | brianp
We just blew a Elmo power supply board on our MyData 12E placement machine. Can anyone suggest a supplier of spare electronic parts? We are down and MyData Inc. says that this part's lead time is 2 weeks. HELP! The MyData p/n for this board is K-029-
Electronics Forum | Fri Apr 10 07:06:47 EDT 2020 | proceng1
We unfortunately use GERBER data to digitize boards more than any CAD. We are CM and many of our customers do not provide CAD. With some Legacy products, we still use 274-D Gerbers.
Electronics Forum | Thu Mar 26 13:31:37 EDT 2020 | rgduval
As everyone else said, if you don't have CAD, it's a pain to digitize the gerbers. So much so that we only did it once when I went to CircuitCam training. After you digitize the gerbers, you have to merge the BOM with it. And you have to tell it p
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Fri Apr 10 09:59:13 EDT 2020 | spoiltforchoice
> We unfortunately use GERBER data to digitize <BR> > boards more than any CAD. We are CM and many of <BR> > our customers do not provide CAD. With some <BR> > Legacy products, we still use 274-D Gerbers
Electronics Forum | Mon Jun 22 11:22:47 EDT 2015 | jax
Take a look at Optimal or Optelco out of Austin. I'm not sure how many Equipment Manufacturers they have modules for at this point(FUJI, Universal, JUKI, etc..) but Mydata is one they control very well.
Electronics Forum | Mon Jun 22 10:54:44 EDT 2015 | seanrou
In our production facility, we currently have 3 different makes of SMD machines. I am wanting to look at solutions that would allow us to control kitting, traceability, etc globally across all the machines. This would need to be a standalone system t
Electronics Forum | Thu Sep 01 11:53:04 EDT 2011 | emeto
Hi Reese, unfortunetely our AOI isnot in line and yes we check first article for each board on the AOI.One of each five boards 1/5 we give to inspector to check and we X-ray if needed.
