Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Thu Jan 13 01:15:35 EST 2005 | Grant
Hi, What do you mean by flex machines? You've hit the nail on the head with the cause of the problem, but I am interested in what you mean about flex machines. Are you talking about a machine that can change the placement head entirely? Our problem
Electronics Forum | Wed Jan 12 14:47:09 EST 2005 | gregp
This will always be the case with in-line spindle machines that rate their cph based on unreal conditions. Flexible placement machines with different head designs will perform better (closer to advertised) and are truley more flexible because you do
Electronics Forum | Tue Jan 11 14:34:52 EST 2005 | Grant
Hi, That's the problem, and in one case it wanted to put 6 reels of 10K resistor, when we only had 10 on the PCB. It really only needed 1 extra feeder, but decided to fill all extra 15 feeders in the bin, so setup is hell. It might think that's a go
Electronics Forum | Wed Dec 14 12:48:21 EST 2005 | grantp
Hi, A second hand TP9-2U MYDATA could be picked up very low cost, however it will only load a single component at a time, which could be ok for your jobs. However if your running 0402, I am not sure if that model will do it accurately. Your machin
Electronics Forum | Fri Oct 18 07:10:40 EDT 2019 | bk
The lock is manually being able to twist into the lock position and unlock by twisting in the opposite direction. I highly doubt that this is the real problem. First check the rings on the tool to see if they are too worn to hold in the mount head. S
| 1 |
