Electronics Forum | Tue Feb 25 15:28:07 EST 2020 | SMTA-Alex
TPSys is the machine operating system, proprietary from Mydata (Mycronic, now). It's based on Linux. You have to purchase the upgrades from Mycronic. Depending on which version you're upgrading from, the cost might vary. If the machine you're buying
Electronics Forum | Mon Oct 17 13:58:09 EDT 2022 | cyber_wolf
I would say not very reliable. The component separator spring, pick point adjustment, and magazine have to be perfect. Your nozzles have to be perfect etc..etc... My general advice is move to a different platform if possible. I have worked extensive
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Fri Apr 26 08:38:14 EDT 2002 | ian
We have had Mydata for eight years and Siplace for six. We have found that the Siemens is much more accurate and faster than the Mydata (about four times quicker). Although the Mydata is more friendly regarding the software, if the upfront preparator
Electronics Forum | Tue Aug 22 17:03:32 EDT 2006 | pms
Steve, Be careful with that TP-9.......... Mydata will support the machine (as long as you pay a registration fee, I believe), but no support for real old software versions. Make SURE it has at least software version 1.6 or above. If not, the magaz
Electronics Forum | Tue Oct 25 00:32:32 EDT 2022 | alexvolovich
> How reliable are TM feeders for 0402 placements? > I have a board with 2000+ 0402s that I need to > run daily. I don't need agilis feeders for > change overs as we use less than 50 feeders > total. Standard TM8 magazines will
Electronics Forum | Mon Feb 14 05:59:42 EST 2000 | Drew
I would suggest contacting some refurb companies depending on how much volume you are talking about. From my experience, I would look at Fuji (very good equipment), Seimens (flexibility) or something like MYDATA. Fuji's tend to run towards the high e
Electronics Forum | Mon Feb 13 11:02:05 EST 2006 | Alan
Hi Grant, Does the Flex mag have the corect pal chip in it? Some of the early Flex mags had tm8 pal chips in them. On the machine this did not have much of an effect (it did at one time allow you to have the hydra pick from the flex because the mach
Electronics Forum | Wed Jul 05 16:01:53 EDT 2006 | Chunks
I agree with Grant. The MYDATA machines we had were very easy to program, adjust and as Grant states make them pick up from just about anything. The best part of them was using partial reels or strips of parts. These machine don't care about havin
Electronics Forum | Tue Nov 14 17:40:03 EST 2006 | pms
Steve, We run Mydata's with CircuitCam, so we do not have the "problem" of having to seperate one build into two programs. We just use more magazines/feeders on the machine. But I can imagine your situation. I think to get around this is that you wo