Electronics Forum | Mon Dec 19 15:56:12 EST 2011 | armandogomez
Hi! I have 2 Mydatas in here, I think the 2 passwords are not the ones you are looking for, Might be that the software is looking for something call the Magic Word? if so, you need to contact MYDATA so that they can send you the "Magic Word", you se
Electronics Forum | Thu Jan 26 11:34:47 EST 2017 | rgduval
If you're lucky, that parameter can be unlocked using the parameters password. If you're unlucky, and it can't be changed using the password, that'll mean it's hardware protected. You'll need a new magic word from Mycronic to update it. Cheers, ..
Electronics Forum | Tue Feb 18 16:13:04 EST 2020 | bk
Just by looking at your attachment and seeing that error, I would say that you didn't put in the magic word when you reloaded your software or mistyped it if you did. If you don't have your magic word you will need to contact mydata or whoever you bo
Electronics Forum | Wed Jul 23 13:20:24 EDT 2008 | jdumont
Afternoon all, wondering if anyone can suggest a process for the localized removal of silk screen wording from a PCB. I have tried using a scalpel successfully but that it too time consuming and prone to error if an operator were to do it. Obviously
Electronics Forum | Sat Oct 29 02:13:27 EDT 2011 | darrenj
Hi, We had a video-related problem and I had to shutdown the machine a few times un-expectedly. Now, the video seems to be fixed (bios config problem), but the machine boots up and says that the serial number is -1 which does not match the calibrati
Electronics Forum | Wed Sep 17 12:51:04 EDT 2008 | stepheniii
We got over 500,000 placements per month with two Mydatas for three consecutive months. And I want to say organized Fuji changeovers beat disorganized mydata changeovers. Even though Daxman is right that they can take a little longer to set up. In o
Electronics Forum | Tue Nov 17 11:53:42 EST 2009 | heba66
Hi, How are you? Do you need any help on Electronics Engineering or anything? Are you looking for some extraordinary Mechanical Engineers ? Do not worry just visit Freelancer.com . There are thousands of coders are waiting for you. They are very expe
Electronics Forum | Fri Aug 19 15:45:45 EDT 2005 | DannyJ
I usually like to have all the trays use pin 1 in a certain direction. In other words, as you are on the operating side of the machine, all the pin 1's should be on the lower left of the tray. With operators, the KISS principle seems to be necessar
Electronics Forum | Sat Jul 03 19:24:25 EDT 1999 | JohnW
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
Electronics Forum | Fri Jul 02 07:55:52 EDT 1999 | Earl Moon
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
