Electronics Forum | Fri Jan 10 11:32:52 EST 2014 | rgduval
Hi, Hans, I would have suggested swapping the MOT card out to see if that fixes the issue (or, changing the MOT card with another one to isolate the card), but, it sounds like you've already done that. I'm surprised that MyData would point you towa
Electronics Forum | Tue Oct 27 11:20:16 EDT 2009 | smtspecialist
I had the same problem back in March with my MY12, since I have two identical lines i swapped things around until swapping the x-wagon motor (the one for fine movements). When I swapped the x-motor I move the problem from one line to the other gener
Electronics Forum | Tue Mar 15 17:47:24 EDT 2022 | guyt
Hi, Has anyone had a issue with a MyData my12 dual camera system, were the calibration always shifts up after a few hours of use. It's not the mechanical calibration. it is like the machine loses it's software calibration co-ordinates ?? Any ideas
Electronics Forum | Tue Aug 09 23:27:24 EDT 2005 | grantp
Hi, I think there are two models of HYDRA, and is it for both? We exchanged the MY9 we had for a MY12, and they said it had a newer model of HYDRA that was easer to align, and maintain, and I wonder if that was part of it, or if this is still an iss
Electronics Forum | Wed Nov 11 11:50:19 EST 2020 | paulanderson
An update. I managed to resolve the issue by wiring my own :) got a friend with a UK spec MY12 to take pics of the internal connections of theirs and then hard wired ours to match - worked perfectly. message me if you have a similar problem and I ca
Electronics Forum | Fri Sep 05 09:22:53 EDT 2014 | rgduval
Hi, Rebecca, Hmm...two x motors? I'm a couple of years removed from MyData's, but, I don't remember two x-motors. Might be something in the My12's that I didn't see in my older My9 (and certainly not in my TP9). As to the small board...unfortun
Electronics Forum | Tue Mar 27 06:15:54 EDT 2007 | CL
Good Morning, We have 5 My machines. We process 0402's daily and have not seen any accuracy issues. We are also processing 0201's, 01005's (although not often thank God!), Micro BGA's, CSP's, etc... Definately not the fastest machines but very flex
Electronics Forum | Fri Mar 24 16:45:03 EDT 2023 | tey422
I believe I was working with the early MY12 model too. Yes, the X-wagon blue ribbon cable were showing wear and tear very fast. Another frequent break downs were the center-jaw, ribbon broke. Most of the Mydata repairs can be done inhouse with spar
Electronics Forum | Thu Feb 06 20:23:35 EST 2020 | bilalfarooqi
Hey everyone, We use a MyData MY12 machine and we are experiencing a problem with the Midas head. I recently replaced a torn vacuum tube that goes on the zfib card. The machine worked perfectly for a day and a half but now MY12 has completely stoppe
Electronics Forum | Mon Nov 04 13:54:24 EST 2002 | csimfgeng
My company is considering the purchase of Mydata My-9 or My-12 machines vs. Juki 2020 machines. Realizing these two machines have distinct differences in both feeder designs, operational issues, and such, I am interested in others who have analized
