Electronics Forum | Wed Apr 05 12:27:52 EDT 2017 | emeto
the package should have nozzle(midas) and camera pre-selected(hydra camera will not work(try standard or high resolution). Odd shape recognition type will not use auto teach option(try chip, leaded, BGA.... )
Electronics Forum | Fri Feb 21 18:27:23 EST 2020 | tomdegas
Thanks for the quick response. I’ll try it tomorrow and let you know if that worked. I do grease it but there may be residual older grease still there.
Electronics Forum | Tue Mar 03 14:38:55 EST 2020 | emeto
I don't remember as it has been a while, but this is the board you have to replace.
Electronics Forum | Wed Mar 04 14:32:21 EST 2020 | bk
The mot mi board is the first board but it is two boards tied together so you need to undo the screws on the first 2 boards on the left.
Electronics Forum | Tue Nov 23 02:23:27 EST 2021 | SMTA-64387687
The TM magazines will work exactly the same on the newer machines, as they did on your TP-11. The MY100, MY200, and MY300 series machines are all available with 2 heads, Midas and Hydra.
Electronics Forum | Tue Oct 18 12:21:40 EDT 2022 | cyber_wolf
I have very limited experience with agilis but I know they use them currently. I am definitely not a fan of the older Hydra heads. There were many problems with them mechanically and with the camera.
Electronics Forum | Sun Dec 17 13:52:59 EST 2023 | tomdegas
How can I bypass the " Hydra force sensor can't calibrate" during the "Hardware Initialization" test. This is stopping me from starting the machine.
Electronics Forum | Thu Feb 01 14:57:05 EST 2024 | cflames17
Have you tried reinstalling all the tools? This appears to be a problem with the tool bank being out of tolerance. Reinstall each tool in your tool bank one by one. Are the hydra tools ok?
Electronics Forum | Tue Aug 09 13:58:24 EDT 2005 | Cmiller
I saw a Mydata demo and it seems like it would be pretty easy to pull a magazine back a few inches then tip it up into the head. I assume this would cause catastrophic damage. I was told this has never happened in North America. Which means it must h
Electronics Forum | Tue Jul 17 09:10:28 EDT 2012 | dontfeedphils
You can enter the service program for the MyData, can't remember exactly how, you have to exit out of tpsys to the command prompt and type service or something along those lines. Then you can check the raw numbers for vacuum and force on the Midas h
