Electronics Forum | Tue Aug 07 11:37:24 EDT 2012 | aadrian80
Could you please tell me how much have you paid for the elmo power supply,we talked with the tehnicians of mydata and they say we have to buy a new supply for our my19. Thanks!
Electronics Forum | Tue Jun 08 22:30:05 EDT 2021 | vtdivtecs
So I am having a little trouble with my mydata MY19. its an older machine picked up used and its had its quirks. recently we tried to start adding electrical verification to our workflow, and had to disable it as we were getting intermittent bad pa
Electronics Forum | Sat May 04 11:24:08 EDT 2013 | amelby
Hi, I have been having a problem with my My19E's hydra. The machine comes up with an error "Failed to locate HYDRA tool reference marks" and stops running. It does not happen for about the first two hours of running. It starts to happen after that an
Electronics Forum | Fri Dec 04 09:09:46 EST 2009 | bandjwet
We are considering purchasing an MY-19 refurbished from the factory. We were not initially looking at this model but it became available. Are there any issues with this model. (We already have an MY-9 and are familiar with the MYDATA and their suppor
Electronics Forum | Mon Feb 24 01:24:01 EST 2020 | sarason
http://members.iinet.net.au/~sarason/ sarason
Electronics Forum | Wed Feb 12 14:14:42 EST 2020 | alvarez94
I am running a MYDATA MY19 machine.the problem is that the first 2 hours after turning on the machine it does not work throwing the following error: "transducers do not agree". After approximately 1 or 2 hours the machine starts working normally. T
Electronics Forum | Mon Jul 04 10:14:55 EDT 2005 | Paul
We need to purchase a pick and place machine. We are considering a Mydata My12 or My19. I would appreciate any comments concerning these machines, are they reputable, have you had any problems etc. Thanks!
Electronics Forum | Sun Feb 23 14:29:30 EST 2020 | midast
Hi We are looking on buying a used MY19. When comparing, the TPSYS version seems to be a major thing. What is TPSYS? Firmware? OS Version? How much does a TPsys upgrade cost? Is it something I can do? Can TM8 feeders handle 0402 reliably? I saw th
Electronics Forum | Thu Feb 13 16:23:07 EST 2020 | alvarez94
I checked it and there is no problem with the lubrication the cables are in good condition. The band feels a little loose I will try to make the adjustment to see if that is the problem.
Electronics Forum | Wed Feb 12 15:15:10 EST 2020 | SMTA-Alex
Not really, just eyeball. Does it look too loose or feel too tight. Is it lubricated properly, is there enough grease on the sprockets? Also, check the ribbon cables. They might be damaged.
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
