Electronics Forum | Thu Mar 10 15:13:31 EST 2005 | pmd
I agree with SirTec. Conflicts with other magazines slotted into machine often cause un reckognized magazine errors elseware. You can also try to re seat the first pair of MOT driver cards in computer this is whare mag data is stored. Also a loose ca
Electronics Forum | Fri Apr 01 01:26:17 EST 2005 | Marv
A couple of things.. 1) The problem is more than likely on the magazine board itself (TC2), most likely the pal chip that stores the serial number and feeder information (you could swap this with a working magazine to verify) 2) The magazine connecto
Electronics Forum | Mon Jun 22 10:54:44 EDT 2015 | seanrou
In our production facility, we currently have 3 different makes of SMD machines. I am wanting to look at solutions that would allow us to control kitting, traceability, etc globally across all the machines. This would need to be a standalone system t
Electronics Forum | Tue Jun 18 19:37:54 EDT 2013 | emrtech
I have created a program that converts the CAD data to MyData file format that has been working great for me on the my9 and my100 pick and place machines. if interested email me at luie1_1@yahoo.com
Electronics Forum | Wed May 11 17:25:22 EDT 2022 | SMTA-64387687
You've replaced the sensors and cleaned any grease residue inside the Midas head, and you're still getting this error. You can check the connector on the little board, on top of the Midas, where the flex cable plugs in. I don't remember, off the t
Electronics Forum | Wed May 11 20:25:38 EDT 2022 | mikevb
Thanks. Yes, I replaced the ffx board with a new one and made sure everything is cleaned. I did check the flex cable connect as I removed all of that to test continuity between everything. It all checked out continuity wise. I also tried to disable t
Electronics Forum | Mon Oct 31 09:28:31 EDT 2016 | douglashaines
Good morning. Could you please tell me where to acquire the manual and offline programming software for the following machine: MyData My9 TP9-2U? The original manufacturer isn't replying to my e-mails.
Electronics Forum | Sat Nov 05 18:07:03 EDT 2016 | sarason
Are you aware of this program "MYdata TPsys CAD converter" http://www.rohrhofer.org/r-tec/ My program PCBSynergy , also does MyData TPSys 2.7 regards sarason
Electronics Forum | Mon May 09 19:24:53 EDT 2022 | rgduval
It's been a minute...but, does the My9 still have MOT boards in the computer cage? If so, swap the MOTz with the MOTx or MOTy, and see if the problem moves. If so, replace the motor controller board. If not, +1 on the encoder or Z-motor. Check fo
Electronics Forum | Wed May 11 20:36:32 EDT 2022 | stephendo
When was the last time you changed the flat ribbon cable on the top? Anytime I had trouble with a mydata that was the first thing they asked.
