Electronics Forum | Mon Mar 07 11:19:13 EST 2005 | cyber_wolf
Another thing : Make sure that there are no other mags plugged into the machine while you are trying to trouble shoot slot 3. I have seen shorted vibratory ID chips mess up other magazines up in different slots. For instance : a shorted vibe in slo
Electronics Forum | Thu Mar 10 15:13:31 EST 2005 | pmd
I agree with SirTec. Conflicts with other magazines slotted into machine often cause un reckognized magazine errors elseware. You can also try to re seat the first pair of MOT driver cards in computer this is whare mag data is stored. Also a loose ca
Electronics Forum | Mon Mar 07 09:44:49 EST 2005 | anonomous
The machine sees a magazine, but with wrong number. somehow one (maybe more) wire from the magazine bus does not reach slot 3, as the other slots work, there is probably not a short, as the magazine bus work for other slots, the problem is probably i
Electronics Forum | Fri Apr 01 01:26:17 EST 2005 | Marv
A couple of things.. 1) The problem is more than likely on the magazine board itself (TC2), most likely the pal chip that stores the serial number and feeder information (you could swap this with a working magazine to verify) 2) The magazine connecto
Electronics Forum | Fri Apr 11 16:11:32 EDT 2003 | stefwitt
The question new or used was discussed several times. If you start fresh and have no experience with one or the other machine vendor, I would get a new machine, whose supplier has a service tech in driving distance. If you select the used machine pa
Electronics Forum | Fri Apr 11 01:01:41 EDT 2003 | kadaba
we are evaluating mirae1025 pick and place machine along with mydata tp9-2u samsung cp45lv has any one got info on mirae and how do you rate this against the other two.. or alternatively should i include anu other similer model. i amd having not muc
Electronics Forum | Mon Jan 31 12:15:32 EST 2000 | Neil
I am looking for a Mydata users group, one possibly located in the Chicago area. If such a group does not exist, I would be more than happy to help start one. I have an older Mydata TP9 (non-UNIX) machine, with weak (yet expensive) support from the m
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Sat Apr 12 00:48:35 EDT 2003 | MA/NY DDave
Hi I want to echo the above good advice. Be careful that you either buy a machine from a company that will be here 5 years out or you buy training, equipment documentation and spare parts to cover you. YiEng, MA/NY DDave
Electronics Forum | Mon Apr 14 12:33:14 EDT 2003 | Brian W.
In many cases, if you buy a used machine, it is worth the investment to register your machine with the manufacturer. That way you have access to support and information for your machine. A number of the machine manufacturers also refurbish their eq
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
